▪
Choke will be turned off automatically when you pull the throttle. (Fig. 10e)
▪
Forcefully pull the starter until the motor engages. (Fig 10f)
▪
Slightly press in the throttle (Fig 10g)
▪
Pull back the brake lever to release the chain brake (Fig 10h)
10.3
Warm start
▪
Activate the chain brake (Fig 10i)
▪
Set the switch (on/off) to ON(I) position (Fig 10j)
▪
Forcefully pull the starter until the motor engages (Fig 10k)
▪
Slightly press down on the throttle (Fig 10l)
▪
Release the chain brake (Fig 10m)
10.4
When engine is saturated with fuel
▪
Remove the air filter
▪
Remove the spark plug
▪
Position the machine in an angle of 45° with the sword upwards
▪
Pull the starters rope a few times
▪
Clean the spark plug and place back
▪
Place back the air filter and start without choke
10.5
To stop engine (Fig 10n)
▪
Release the throttle and allow engine to return to idle speed.
▪
Push the I/O (on/off) switch to O (off) to stop engine.
Note: for emergency stopping, simply activate chain brake and switch the
I/O (on/off) switch to o (off).
10.6
Chain brake operational test
Test the chain brake periodically to ensure proper function.
Perform a chain brake test prior to initial cutting, following extensive cutting, and definitely
following any chain brake service.
Test chain brake as follows:
▪
Place saw on a clear, firm, flat surface.
▪
Start engine.
▪
Grasp the rear handle (9) with your right hand (fig. 11).
▪
With your left hand, hold the front handle (4) (C)] firmly (fig. 11).
▪
Squeeze the throttle trigger to 1/3 throttle, then immediately activate the chain brake lever
(3) (fig. 11).
Warning: activate the chain brake slowly and deliberately. Keep the chain
from touching anything; don t let the saw tip forward.
▪
Chain should stop abruptly. When it does, immediately release the throttle trigger.
Warning: if chain does not stop, turn engine off and take your unit to the
nearest authorized service center for service.
▪
If chain brake functions properly, turn the engine off and return the chain brake to the
disengaged position.
Copyright © 2022 VARO
POWEG2030
P a g e
| 11
EN
www.varo.com