Advertenties
Pairing accessories and device
Pairing is the act of enabling accessories and devices to communicate with each other by wireless.
The rotating laser and the laser receiver are already paired when supplied. This helps ensure trouble-free
operation within the vicinity of other wireless devices.
Additional laser receivers or PRA 90 automatic tripods cannot be used without first being paired.
▶ Pair the rotating laser and the laser receiver. → page 33
▶ Pair the tripod and laser receiver. → page 33
3.1.7
LED indicators
The rotating laser is equipped with an LED display.
Status
All LEDs blink.
The auto-leveling LED blinks green.
The auto-leveling LED lights green constantly.
The shock warning LED lights orange constantly.
The inclination LED blinks orange.
The inclination LED lights orange constantly
The surveillance LED blinks orange.
The surveillance mode LED lights orange con-
stantly.
The LED arrows blink orange.
The LED arrows light orange constantly.
The left LED arrow lights orange.
The right LED arrow lights orange.
3.1.8
Li-ion battery charge state display
The Li-ion battery features a state of charge display.
Status
4 LEDs light.
3 LEDs light.
2 LEDs light.
1 LED lights.
1 LED blinks.
When the tool is in operation, the battery charge status is indicated in the display on the tool.
When not in operation, battery charge state can be indicated by lightly pressing the release button.
During charging, charge state is indicated by the LEDs on the battery (please refer to the operating
instructions for the charger).
3.1.9
Items supplied
PR 30-HVS A12 rotating laser, PRA 30 (03) laser receiver / remote control unit, 2 batteries (AA cells), PRA 83
laser receiver holder, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group | USA: www.hilti.com
26
English
Meaning
The tool has been bumped, knocked off level or is
subject to some other error.
The tool is in the leveling phase.
The tool has leveled itself / is operating normally.
Shock warning mode is deactivated.
Alignment in the sloping plane.
Inclined plane mode is active.
The tool is aligning the laser plane with the refer-
ence point (PRA 30).
The tool is in surveillance mode. Alignment with the
reference point (PRA 30) is correct.
The tool is in electronic inclination alignment mode,
the PRA 30 is receiving no laser beam.
The tool is correctly aligned with the PRA 30.
Rotate the tool clockwise.
Rotate the tool counterclockwise.
Meaning
Charge status: 75 % to 100 %
Charge status: 50 % to 75 %
Charge status: 25 % to 50 %
Charge status: 10 % to 25 %
Charge status: < 10 %
2134492
*2134492*
Advertenties
