Advertenties
Beschikbare talen
Beschikbare talen
Proceed as follows to measure direct currents (A):
Switch the multimeter on and select "10A, mA, or µA" mode.
The table shows the different measurement modes and the corresponding
measurement ranges. Select the desired measurement range and correspond-
ing measurement sockets.
Measurement mode
µA
mA
10 A
Insert the red test lead into the mAµA or 10A measurement socket. Insert the
black test lead into the COM measurement socket.
Connect the two test probes in se-
ries to the object that you want to
measure (e.g. battery or circuit).
The electrical circuit must be dis-
connected before you connect the
probes.
Reconnect the circuit. The meas-
ured value appears on display.
After taking a measurement, dis-
connect the circuit and remove the
test leads from the measured ob-
ject. Switch the multimeter off.
64
Measurement range
<6000 µA
6 mA – 600 mA
600 mA – 10 A
Measurement sockets
COM + mAµA
COM + mAµA
COM + 10 A
+
Advertenties
