Advertenties
Beschikbare talen
Beschikbare talen
11 Taking measurements
Never exceed the maximum permitted input values. Never touch circuits or
parts of circuits when they may contain voltages greater than 33 V/ACrms or
70 V/DC! Danger to life!
Measurements can only be taken when the battery and fuse compartment is
closed. Cables cannot be inserted when the compartment is open.
Before measuring, check the connected test leads for damage, such as cuts,
tears and kinks. Never use defective test leads! Danger to life!
When taking measurements, do not touch any area beyond the grip markings
on the probe tips.
Only connect the two test leads that you require to take measurements. For
safety reasons, remove all unnecessary test leads from the multimeter before
taking a measurement.
Measurements in electrical circuits rated at >33 V/AC and >70 V/DC must only
be carried out by qualified and trained personnel who are familiar with the
relevant regulations and the associated hazards.
Check the multimeter for functionality before each measurement. An incorrect check
result indicates a possible malfunction. The multimeter must be checked.
"OL" (overload) indicates that the measurement range has been exceeded.
59
Advertenties
