Download Print deze pagina

RADEMACHER ReWiSo Montage- En Bedieningshandleiding pagina 142

Advertenties

Beschikbare talen
  • NL

Beschikbare talen

i
Description
ReWiSo has been developed for automatic control and convenient manual operation
of an awning or Venetian blind. The controller has a very high degree of flexibility for
connection and adjustment and can therefore be adapted individually to different
installation conditions. Please use these operating instructions to adapt the automatic
functions to suit your requirements.
Scope of Supply
ReWiSo consists of weather station and operating unit. Two (2) batteries to power the
operating unit are included in the scope of supply.
Instructions for Commissioning
Installation, testing, commissioning and troubleshooting on the controller may
only be carried out by a qualified electrician.
Proceed as follows to commission the controller:Proceed as follows to commission
the controller:
1. Carry out the mechanical installation and electrical connection (see section
„Installation and Commissioning")
2. Carry out the basic setting (see section „Basic Setting")
3. Adjust the automatic functions (see section „Adjusting the Automatic Functions")
Connection and Control Possibilities
An awning or Venetian blind drive can be connected to the controller. If several awnings
or Venetian blinds are to be controlled together, connection via a group control relay is
possible.
The following environmental parameters are measured and displayed:The following
environmental parameters are measured and displayed:
Indoor and outdoor temperature (energy-saving function)
Brightness
Wind velocity
Precipitation
142
GB

Advertenties

loading

Deze handleiding is ook geschikt voor:

2696