Advertenties
Beschikbare talen
Beschikbare talen
i
Service
Call Up Service Data
The software version of the operating unit and weather station can be shown on the
display. The Service mode can be called up from the basic settings by holding the SET
key depressed for 3 seconds. The software version of the operating unit (
displayed first; briefly press the SET key to display the software version of the controller
/ weather station (
the service data display by again briefly pressing the SET key.
i
Works Settings
On delivery of the ReWiSo controller, the following default settings are stored for
Automatic mode:
Sunshading from sun intensity > 40 kLux
Delay time with sun before sunshading
- Extend: 1 min,
- Retract: 12 min,
Bar until indoor temperature > 18° C
Bar until outdoor temperature > 5° C
Wind alarm from 4 m/s
Rain alarm activated
). The display 10 means Version 1.0, 12 means 1.2, etc. Quit
GB
)is
179
Advertenties
