Advertenties
Beschikbare talen
Beschikbare talen
i
C. Retraction Delay
Adjust the value with
setting of the next parameter.
i
D. Indoor Temperature Limit
After setting the retraction delay, now enter the indoor temperature below which the
extension of the sunshade is to be barred.
Using the indoor temperature limit, you can use the heat of the sun to achieve the
desired room temperature (e.g. in the winter - energy-saving function). Only when the
value is exceeded does the sunshade extend when the sun comes out. The indoor
temperature limit is active only in Automatic mode of the controller. Manual operation
of the sunshade is still possible.
The default setting for the indoor temperature limit is 18° C.
Adjust the value with
indoor temperature limit. Then press SET to proceed to the setting of the next parameter.
(higher) and
(lower). Then press SET to proceed to the
(higher) and
(lower) or select
GB
to deactivate the
151
Advertenties
