Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
• Please read the instructions carefully before using.
• Use outdoors only.
• Do not use an adjustable low pressure regulator.
GB
Use fixed regulators that comply with the European
standard concerning them.
Follow these instructions carefully to avoid seriously
damaging your device.
Thank you for choosing the Campingaz
A - ASSEMBLY
Remove all the component parts from the oven, and
identify them with reference to the exploded diagram
(see page 4).
1. Insert the screws through the holes of both side handles
(3) as shown on fig. 1. Tighten screws to secure.
2. Insert the screws through the holes of oven door handle
(4) as shown on fig. 2. Tighten screws to secure.
3. Open oven door and insert the oven heat diffuser (6)
in the lower support position. Make sure it is inserted
completely (fig. 3).
Note: The heat diffuser helps distribute the heat evenly
and keep the burner clean.
4. Insert the oven rack (5) (fig. 4).
Note: The height of the oven rack may be adjusted to
accomodate the size of the food dish. You may insert
the oven rack at 2 different heights.
5. Open the stove lid (1) and install the grid (2) as shown
on fig. 5.
6. Install the wind guards (8) (fig. 6): open the stove lid
and rotate the wind guard holder inside the stove
lid toward outside. Insert the wind guard holder into
the slot on the wind guard. Repeat for the other side.
Note: the wind guards can be opened and used as side
tables (fig. 7).
7. Install the battery (fig. 8): Your device operates on a type
LR6 1.5 V battery. Unscrew the battery housing cap (14)
and remove it. Insert the battery as shown on fig. 8, then
put the cap back.
CAMP STOVE OVEN
Camp Stove Oven.
®
16
B - PREPARATION FOR USE
IMPORTANT
This
operation
manual
your
Campingaz
®
complete safety.
Consult
the
manual
with
the
device,
gas cylinder.
Abide by the instructions given in this manual.
Failure to do so may be dangerous for the user and
anyone else close by.
Always keep this manual in a safe place, readily
available for reference if necessary.
This device is manufactured to use either butane
or propane, with a suitable regulator and a hose or
flexible hose, which are sold separately.
This unit should only be used outdoors, and away
from inflammable materials.
Never use a unit that is leaking, that is not operating
properly or that is damaged. Return it to your dealer,
who will indicate the nearest servicing agent.
Never modify this device, or use it for applications
for which it was not intended. Any modification may
prove dangerous.
B - 1 - Gas cylinder and regulator
This device can be used with a CAMPINGAZ
cylinder type 907 and the CAMPINGAZ
mbar regulator.
It can also be used with other, larger, butane or propane
reservoirs (6 kg, 13 kg, etc.) and the appropriate regulators
(consult your dealer):
France, Belgium, Luxembourg, United Kingdom, Ireland,
Italy, Switzerland:
Butane 28-30 mbar / propane 37 mbar
Norway, Sweden, Denmark, Finland, Netherlands:
Butane 30 mbar / propane 30 mbar
Germany, Austria:
Butane 50 mbar / propane 50 mbar
When connecting or changing a cylinder, always operate in
an open, well-ventilated place, and never in the presence of
a flame, spark or any other source of heat.
will
help
you
device
properly
and
to
familiarise
yourself
before
connecting
®
28-30 mbar or 50
®
use
in
the
butane
Advertenties
Inhoudsopgave
