Automatic Operation - Amica SHC Series Gebruikershandleiding
Verberg thumbnails
Zie ook voor SHC Series:
- Gebruikershandleiding (112 pagina's) ,
- Gebruikershandleiding (64 pagina's) ,
- Gebruikershandleiding (76 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
OPERATION
SEMI-AUTOMATIC OPERATION
If the oven is supposed to turn off at specified
time, do the following:
•
set the oven function knob and tem-
perature control knob in positions
where the oven should work,
•
press button 1 until the lamp at
starts to flash, and the display
shows "0.00",
•
set up the needed work time using
buttons 3 and 2, within the range
from 1 minute to 10 hours.
The set-up time will be memorized after about
5 sec., the display will show the current time
again, and the lamp at
After the set-up time has elapsed, the oven
will turn off automatically, the sound signal
will turn on, and the lamp at
flash;
•
set up the oven function and tem-
perature control knobs in turn-off
positions,
•
press buttons 1, 2 or 3 to turn the
signal off; the lamp will go out, and
the display will indicate the current
time.
Notice!
In ovens equipped with one control knob,
the oven function knob is combined with the
temperature control knob.
2
will be turned on.
will start to
3
1
AUTOMATIC OPERATION
If the oven is supposed to turn on for specified
work time and turn off at specified time, set up
the work time and the work end time:
•
press button 1 until the lamp at
starts to flash, and the display
shows "0.00",
•
set up the needed work time using
buttons 3 and 2, within the range
from 1 minute to 10 hours.
The set-up time will be memorized after about
5 sec., the display will show the current time
again, and the lamp at
•
press button 1 until the lamp at
starts to flash,
•
set up the turn-off (work end) time
using buttons 3 and 2, which is
limited up to 23 hours 59 minutes.
•
set the oven function knob and
temperature control knob in needed
positions where the oven should
work.
Lamps at
and
oven will start working from the moment
resulting from the difference between the
set-up work end time and the set-up work
time, (e.g. the set-up work time is 1 hour, the
set-up work end time is 14.00, so the oven
will plug in automatically at 13.00).
2
12
will be turned on.
are switched on; the
3
1
Advertenties
Hoofdstukken
Inhoudsopgave
