OPERATION
Before first use
Remove packaging, empty the drawer,
clean the interior of the oven and the hob.
Take out and wash the oven fittings with
warm water and a little washing–up liquid.
Switch on the ventillation in the room or
open a window.
Heat the oven (to a temperature of 250°C,
for approx. 30 min.), remove any stains and
wash carefully; the heating zones of the hob
should be heated for around 4 min. without
a pan.
Important!
In ovens equipped with the electronic pro-
grammer, the time "12.00" will start flashing
in the display field upon connection to the
power supply.
The programmer should be set with the cur-
rent time. (See Electronic programmer ). If the
current time is not set operation of the oven
is impossible.
The knobs are "concealed" in the control
panel, to select it you should:
– push the knob in gently and then re-
lease it;
– set it to the right position.
10