Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
PROGRAMMES
Programme
2)
3)
1) The pressure and the temperature of the water, the variations of the mains supply, the options and the quantity of
dishes can change the values.
2) With this programme you have the most efficient use of water and energy consumption for crockery and cutlery
with normal soil. (This is the standard programme for test institutes).
3) With this programme you can wash a load with fresh soil. It gives good washing results in a short time.
Information for test institutes
For all the necessary information for test
performance, send an email to:
info.test@dishwasher-production.com
SETTINGS
Programme selection mode and
user mode
When the appliance is in programme
selection mode it is possible to set a
programme and to enter the user mode.
In user mode, the following settings
can be changed:
• The level of the water softener according
to the water hardness.
These settings will be saved until you
change them again.
Degree of
Programme
soil
phases
Type of load
Normal soil
• Prewash
Crockery and
• Wash 50 °C
cutlery
• Rinses
• Dry
Normal soil
• Prewash
Crockery and
• Wash 65 °C
cutlery
• Rinses
• Dry
Fresh soil
• Wash 60 °C
Crockery and
cutlery
• Rinses
Consumption values
1)
Dura-
tion
(min)
195
120 -
130
30
or 65 °C
Write down the product number (PNC) that
is on the rating plate.
How to set the programme
selection mode
The appliance is in programme selection
mode when the on/off indicator comes on
and start indicator starts to flash.
When you activate the appliance, usually it
is in programme selection mode. However,
if this does not happen, you can set the
programme selection mode in the following
way:
Press and hold simultaneously Start and
Delay until the appliance is in programme
selection mode.
Progress 41
Energy
Water
(kWh)
(l)
1.039
11
1.3 - 1.6
15 - 17
0.8
9
Advertenties
Hoofdstukken
Inhoudsopgave
Probleemoplossen
