Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
Technical Data
Article number:
Model number:
Power supply:
Power:
Protection class
Capacity:
Timer:
Temperature setting:
Troubleshooting
If the device does not work properly, rst check whether you are able to rectify the prob-
lem yourself. If the problem cannot be solved with the following steps, contact the cus-
tomer service department.
Do not attempt to repair an electrical device yourself!
Problem
The device does not
work. The displays on
the control panel do
not switch on.
The fuse in the elec-
trical distributor (fuse
box) is triggered.
02095_ 02363_ 04180_ 04184_ 04189_de-en-fr-nl_A5_V2.indb 36
36
RA-001
220-240 V~ 50-60 Hz
1800 W
I
9 l
Up to 60 minutes; "Drying" programme: 2 – 24 hours
65°C – 200°C (130°F – 400°F)
Possible cause
The mains plug is not
inserted correctly in the plug
socket.
The plug socket is defective. Try another plug socket.
No mains voltage is present. Check the fuse of the electrical
The overheating protection
has been triggered.
Too many devices connect-
ed to the same circuit.
Fix
Push the mains plug into the
plug socket as far as it will go.
distributor (fuse box).
Pull the mains plug out of the
plug socket and allow the
device to cool down completely.
Then try again. If the device still
cannot be switched on, contact
the customer service depart-
ment.
Reduce the number of devices
in the circuit.
12.10.2018 14:43:35
Advertenties
Hoofdstukken
Inhoudsopgave
