Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
Never immerse the main unit and connecting cable in water or
other liquids and ensure that they cannot fall into water or be-
come wet. There is a danger of electric shock from water.
Do not pour any liquids (e.g. oil or water) directly into the device
or the rotating basket or place a liquid- lled vessel into the de-
vice. It works exclusively with hot air.
Never use the open door as a deposit surface, e.g. for the rotat-
ing basket! Hot accessories could damage the door. In addition,
the device could tip over and present a risk of injury.
The device must always be disconnected from the mains power
when it is left unattended and before transporting, assembling,
disassembling and cleaning the device.
Do not make any modi cations to the device. Also do not replace
the connecting cable yourself. If the device, the connecting ca-
ble or the accessories of the device are damaged, they must be
replaced by the manufacturer, customer service department or
a specialist workshop in order to avoid any hazards.
The device is not designed to be operated with an external timer
or a separate remote control system.
Note the cleaning instructions in the "Cleaning" chapter!
DANGER – Risk of Electric Shock
Use and store the device only in closed rooms. Do not operate the device in rooms
with high humidity.
Should the main unit fall into water, cut off the power supply immediately. Do not
attempt to pull the device out of the water while it is still connected to the mains
power! Have the device checked in a specialist workshop before using it again.
Never touch the device or the connecting cable with wet hands when these
components are connected to the mains power.
WARNING – Danger of Fire
Do not use the device in rooms containing easily ignitable or explosive substances.
Do not operate the device in the vicinity of combustible material. Do not place any
combustible materials (e.g. cardboard, paper or plastic) on or in the device.
Do not connect the device along with other consumers (with a high wattage) to a mul-
tiple socket in order to prevent overloading and a possible short circuit ( re).
Do not insert anything into the ventilation openings of the device and make sure that
these do not become clogged.
02095_ 02363_ 04180_ 04184_ 04189_de-en-fr-nl_A5_V2.indb 28
28
12.10.2018 14:43:34
Advertenties
Hoofdstukken
Inhoudsopgave
