Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
PROBLEM
CAUSE
Faulty or out
of order door
gaskets
Ash remains along
the stove
Not sealed fume
pipes
Stove running
and display
Reached ambient
showing "WORK,
temperature
MODULATI"
Stove running and
Reached fume
display showing
outlet limit
"HOT FUME"
temperature
14
TECHNICAL DATAS
14.1
REPAIR INFORMATION
Now we give some instructions for the Authorized Technician to take into consideration to have access to stove
mechanical components.
• For fuse replacement in the electric socket which stands on the back of the stove, extract the fuses to change
with the aid of a screwdriver for opening the shutter (see Fig. 42 page 35).
Proceed as follows:
• Release the cap. Unhook right and left side panels and extract it from its housing.
• After these operations you can have access at the following components: geared motor, ignition plug,
ambient fan, fume fan, ambient probe, fume probe, thermostat, electronic board, pressostat.
• For cleaning or replacemente of the auger it is necessary to unscrew the three bolt of the geared motor and
to extract it, unscrew the two screws lying under the geared motor of the auger, remove the hand rejector
inside the hopper and then unscrew the inner bolt of the auger. To assembly proceed at the contrary.
NICE - MIRIAM - CRISTAL - LEONORA - PRETTY - DIANA - KRISS - MARY
SOLUTION
Replace the gaskets.
Contact an expert stove-repairer who will immediately
provide for sealing the junctions with high-temperature
silicone and/or for replacing pipes with those in
compliance to current regulations. A not sealed fume
channelisation can be noxious to health.
The stove runs at minimum. NO PROBLEM!
The stove runs at minimum. NO PROBLEM!
Fig. 42 - Shutter with fuses to remove
INTERVENTION
EN
35
Advertenties
Hoofdstukken
Inhoudsopgave
