Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
Fig. 28 - Burning pot box cleaning
• Clean and drain away the burning pot from ash which has accumulated in its inner (see Fig. 28 page 26).
• Clean also the hole for pellet drop with a brush (see Fig. 29 page 26).
• Check if the fire plate is placed in the correct position (see Fig. 30 page 26).
• The ash remains have to be stored in a metal container with a sealed lid and this container must never get
in touch with combustible materials (for example put on a wooden floor), as the inner ash keeps the embers
firing for a long time.
• Only when the embers are off the ash coul be poured in the organic waste.
• Pay attention if the flame becomes red colured, if it is weak or if black smoke creates in the inner: in this case
the burning pot is encrusted and needs to be cleaned. If it is broken, it must be replaced.
•
12.3
HOPPER AND AUGER CLEANING
Per each pellets supply, check the probable presence of meal, sawdust and other remanins on the hopper
bottom. If present, they must be removed with the aid of a vacuum cleaner (see Fig. 31 page 26).
26
Fig. 29 - Cleaning with a brush
Fig. 31 - Hopper and auger cleaning
The hand rejector grid must not ever be removed fron its housing. Clean the hopper bottom
and the visible part of the auger exclusively as shown in the picture (see Fig. 31 page 26).
If the auger is blocked by a foreign object (for example: nails), and if it needs to be cleaned,
DO NOT remove the hand rejector and DO NOT touch the auger. Please contact the
Technical Assistance service.
The hand rejector can be removed exclusively by an authorized technician.
NICE - MIRIAM - CRISTAL - LEONORA - PRETTY - DIANA - KRISS - MARY
Fig. 30 - Correct position of the fire plate
Advertenties
Hoofdstukken
Inhoudsopgave
