Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
10.10
TEMPERATURE SETTING
• To modify the ambient temperature it is sufficient to press P1 and P2 keys according to the desired temperature
inside the menu "SET TEMP AMBIENT".
• To see the set temperature, press once P1 key.
10.11
FUME TEMPERATURE
To check the fume temperature at the exhaust it is sufficient to keep pressed P2 key.
10.12
SWITCHING OFF
To switch the stove off, keep pressed P4 key: the display shows "FINAL CLEANING". After about 10 minutes, also
the fume fan switches off (this happens always, independently if the stove is hot or cold). Then "OFF" will be
shown.
If the pellets are of bad quality (if contains sizing agents, oils, varnishes, plastic remains or if
it is mealy), deposits will form along pellets drop pipe during the running. When the stove is
switched off, these remains could form little hot coals that rising along the pipe could reach
the pellets on the hopper burning them and creating a thick and harmful smoke inside the
room. Please always keep the hopper closed with its own lid. If the pipe is sooty, please
clean it (see INTRODUCTION page 25).
10.13
CLOCK SETTING
• Press P3 key and then P5 key till underlining "SET CLOCK" menu (02).
• Press once P3 (DAY) and with P1 and P2 keys select the day of the week (Monday, Tuesday, Wednesday,
Thursday, Friday, Saturday, Sunday).
• Press for the second time P3 key (HOURS) and with P1 and P2 keys set the hour.
• Press for the third time P3 key (MINUTES) and with P1 and P2 keys select the minutes. Press for the fourth time
P3 key (DAY) and with P1 and P2 keys select the day of the month (1,2,3...29,30,31).
• Press for the fifth time P3 key (MONTH) and with P1 and P2 keys select the month:
• Press for the sixth time P3 key (YEAR) and with P1 and P2 keys select the year.
• To exit from the programme press P4 twice.
10.14
DAILY PROGRAMMING
It allows to enable, disable and settle the daily chronothermostat functions.
Press P3 key and then P5 key till the menu "SET CHRONO". Press once P3 key and with P5 and P6 keys select
the "PROGRAM DAY". Press once P3 till finding "CHRONO DAY". With P1 and P2 keys put in "OFF" or "ON". It is
possible to set two working times delimited by the set times.
After "CHRONO DAY":
• Press P5: the display shows "START 1", with P1 and P2 keys set the ignition time value or put in "OFF".
• Press P5: the display shows "STOP 1", with P1 and P2 keys set the switching off time value or put in "OFF".
• Press P5: the display shows "START 2", with P1 and P2 keys set the ignition time value or put in "OFF".
• Press P5: the display shows "STOP 2", with P1 and P2 keys set the switching off time value or put in "OFF".
• Press P4 key three times to exit from the menu.
10.15
WEEK-END PROGRAMMING
It allows to enable, disable and settle the chronothermostat functions during saturday and sunday.
Press P3 key and then P5 key till the menu "SET CHRONO". Press once P3 key and with P5 and P6 keys select
"PROGRAM WEEK-END". Press once P3 till finding "CHRONO WEEK-END". With P1 and P2 keys put in "OFF" or
"ON".
It is possible to set two working times delimited by the set times and valid only for saturday and sunday.
After "CHRONO WEEK-END":
• Press P5: the display shows "START 1 WEEK-END", with P1 and P2 keys set the ignition time value or put in "OFF".
• Press P5: the display shows "STOP 1 WEEK-END", with P1 and P2 keys set the switching off time value or put in
"OFF".
NICE - MIRIAM - CRISTAL - LEONORA - PRETTY - DIANA - KRISS - MARY
EN
21
Advertenties
Hoofdstukken
Inhoudsopgave
