Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
m
WARNING! RISK OF
EXPLOSION!
If there is an explosive dust/air mixture,
u
you must use a specially designed
extraction appliance .
Do not use dust extraction systems (dust
u
collector or vacuum cleaner) when
sanding metals . There is a risk of fire due
to flying sparks!
m
WARNING! RISK OF FIRE!
When working with power tools
u
which have a dust collector or can be
connected to a vacuum cleaner via a
vacuum cleaner adapter, there is a risk
of fire! In unfavourable conditions, e .g .
when sparks are flying while sanding
metal or metal residues in wood, wood
dust in the dust collector (or the bag of
the vacuum cleaner) can spontaneously
ignite . This is a particular risk if the
wood dust is mixed with paint residues
or other chemicals and the workpiece
has become hot after being worked for
a long time . Therefore, do not allow
the workpiece to overheat and always
empty the dust box or the dust bag of
the vacuum cleaner before taking a
break from work .
Ensure that your workplace is
u
adequately ventilated .
Observe the regulations applicable in
u
your country regarding the materials to
be worked .
NOTE
Materials containing asbestos must
u
not be processed . Asbestos is a known
carcinogen .
Fitting the dust collector
Push the dust collector
o
collector connection
(Fig . C) .
12 GB/IE/NI
onto the dust
11 ]
[
from above
9 ]
[
Removing the dust collector
Pull the dust collector
o
(Fig . C) .
Connecting the dust extraction
adapter and reducer
1 . Push the dust extraction adapter
the connection
[
9 ]
2 . Push the reducer
15 ]
[
adapter
into the adapter fitting .
[
16 ]
3 . Push the hose from a suitable dust
extraction appliance (e .g . a household
or workshop vacuum cleaner) onto the
reducer
.
15 ]
[
Removing the dust extraction adapter
and reducer
1 . Pull off the hose of the dust extraction
appliance (Fig . D) .
2 . Remove the reducer
3 . Pull the dust extraction adapter
upwards off the connection
˜ Operation
m
WARNING!
Switch off the product and
disconnect it from the power before
replacing attachments, cleaning and
when not in use .
NOTE
Sanding pressure: Apply minimal
u
pressure when sanding . The own weight
of the product is sufficient for a good
sanding result . In addition, working this
way helps to reduce the wear on the
abrasive belt
13 ]
[
workpiece becomes more smooth .
Material removal and surfacing:
u
The material removal rate and surface
quality are determined by the belt speed
and grain size of the abrasive belt
(see "Selecting speed and abrasive
belt") .
off upwards
[
11 ]
onto
[
16 ]
(Fig . D) .
for the dust extraction
.
15 ]
[
16 ]
[
.
9 ]
[
and the surface of the
13 ]
[
Advertenties
Hoofdstukken
Inhoudsopgave
