Download Inhoudsopgave Inhoud
Deel
Print deze pagina
  1. Handleidingen
  2. Merken
  3. Textron Company Handleidingen
  4. Grasmaaiers
  5. JACOBSEN HR 9016 Turbo
  6. Onderhoudshandleiding

Textron Company JACOBSEN HR 9016 Turbo Onderhoudshandleiding

Verberg thumbnails
Inhoudsopgave

Advertenties

Quick Links

Download deze handleiding
Parts & Maintenance Manual
Onderdelen- en onderhoudshandleiding
HR 9016 Turbo
HR 9016 Turbo
70538 – Kubota V3800DICR-T-E3B, 4WD*
70539 – Kubota V3800DICR-T-E3B, 4WD with ROPS
70540 – Kubota V3800DICR-T-E3B, 4WD EC with ROPS
70541 – Kubota V3800DICR-T-E3B, 4WD EC*
70538 – Kubota V3800DICR-T-E3B, 4WD*
70539 – Kubota V3800DICR-T-E3B, 4WD met ROPS (antikantelbescherming)
70540 – Kubota V3800DICR-T-E3B, 4WD EC met ROPS (antikantelbescherming)
70541 – Kubota V3800DICR-T-E3B, 4WD EC*
*- These units must have a certified ROPS/cab installed by the Dealer before the mower can be put into service and registered for warranty coverage.
*- Deze machines vereisen een gecertificeerde ROPS/dop, die door de dealer moet worden geïnstalleerd, alvorens de maaimachine in gebruik kan worden
genomen en voor garantie kan worden geregistreerd.
WARNING: If incorrectly used this machine can cause severe injury.
Those who use and maintain this machine should be trained in its
proper use, warned of its dangers and should read the entire manual
before attempting to set up, operate, adjust or service the machine.
WAARSCHUWING
WAARSCHUWING:
Bij onjuist gebruik kan deze machine ernstig
letsel veroorzaken. Degenen, die deze machine gebruiken en
onderhouden, moeten getraind zijn in de juiste bediening, gewezen
zijn op de gevaren en dienen de gehele bedieningshandleiding te
hebben gelezen, alvorens pogingen te ondernemen de machine in te
stellen, te bedienen, af te stellen of onderhoud aan de machine te
plegen.
GB
NL
United
Netherlands
Kingdom
Rotary Mower
™
Rotatiemaaier
™
WARNING
4228362-NL-Rev A
6
5
9
1 1
1 6
1 3
1 5
7
8
1 8
1 - I N C L U D E S I T E M S 3 - 1 6
1 7
1 9
3
1 0
4
When Performance Matters.
™

Advertenties

Hoofdstukken

Inhoudsopgave
loading

Gerelateerde Handleidingen voor Textron Company JACOBSEN HR 9016 Turbo

Samenvatting van Inhoud voor Textron Company JACOBSEN HR 9016 Turbo

  • Pagina 1 4228362-NL-Rev A 1 - I N C L U D E S I T E M S 3 - 1 6 Parts & Maintenance Manual Onderdelen- en onderhoudshandleiding HR 9016 Turbo Rotary Mower ™ HR 9016 Turbo Rotatiemaaier ™ 70538 – Kubota V3800DICR-T-E3B, 4WD* 70539 –...

  • Pagina 2: Suggested Stocking Guide

    State of California to cause cancer and birth defects or © 2012, Jacobsen, A Textron Company/Textron Innovations Inc. “All rights reserved, including the right to reproduce this material other reproductive harm. or portions thereof in any form.”...

  • Pagina 3: Inhoudsopgave

    Table of Contents Safety Maintenance Operating Safety ..........4 General .............. 19 Important Safety Notes .........5 Inspecting Blades ..........19 Specifications Sharpening Blades ..........20 Product Identification..........6 Engine ..............21 Cutting Units ............6 Engine Oil ............21 Mower ..............6 Muffler and Exhaust ...........21 Engine ..............7 Air Filter ..............22 Weights and Dimensions ........7...

  • Pagina 4: Safety

    SAFETY SAFETY OPERATING SAFETY ______________________________________________________ WARNING EQUIPMENT OPERATED IMPROPERLY OR BY UNTRAINED PERSONNEL CAN BE DANGEROUS. Familiarize yourself with the location and proper use of all controls. Inexperienced operator’s should receive instruction from someone familiar with the equipment before being allowed to operate the machine. Safety is dependent upon the awareness, concern, and 11.

  • Pagina 5: Important Safety Notes

    SAFETY IMPORTANT SAFETY NOTES ________________________________________________ This safety alert symbol is used to alert you to potential hazards. DANGER - Indicates an imminently hazardous situation which, if not avoided, WILL result in death or serious injury. WARNING - Indicates a potentially hazardous situation which, if not avoided, COULD result in death or serious injury.

  • Pagina 6: Specifications

    PRODUCT IDENTIFICATION_________________________________________________ 70538H ......HR 9016 Turbo, 4 Wheel Drive 70539 ......HR 9016 Turbo, 4 Wheel Drive ® with ROPS A Textron Company 70540 ......HR 9016 Turbo, 4 Wheel Drive CHARLOTTE, NC MADE IN U.S.A. with ROPS EC 7053801651 70541H ......

  • Pagina 7: Engine

    SPECIFICATIONS ENGINE __________________________________________________________________ Make ....... Kubota High Idle....2700 rpm Model ......V3800 DICR-T-E3B Low Idle ....1050 rpm Horsepower..... 96.4 hp (71.9 kW) @ 2600 rpm Lubrication: Note: Actual sustained horsepower will likely be lower Capacity....3.5 gal. (13.2 l) than listed in specifications due to operating limitations Type ......

  • Pagina 8: Declaration Of Conformity

    Valmistajan toiminimi ja täydellinen osoite ▪ Nom commercial et adresse complète du fabricant ▪ Firmenname und vollständige Adresse des Herstellers ▪ Jacobsen, A Textron Company Επωνυμία και ταχυδρομική διεύθυνση κατασκευαστή ▪ A gyártó üzleti neve és teljes címe ▪ Ragione sociale e indirizzo completo del fabbricante ▪...
  • Pagina 9 Plaats en datum van de verklaring ▪ Deklaratsiooni väljastamise koht ja kuupäev ▪ Vakuutuksen paikka ja päivämäärä ▪ Lieu et date de la déclaration ▪ Jacobsen, A Textron Company Ort und Datum der Erklärung ▪ Τόπος και ημερομηνία δήλωσης ▪ A nyilatkozat kelte (hely és idő) ▪ Luogo e data della dichiarazione ▪...

  • Pagina 10: Adjustments

    ADJUSTMENTS ADJUSTMENTS GENERAL________________________________________________________________ adjustment cannot be made, contact an authorized Jacobsen Dealer. WARNING 2. Replace, adjust, worn damaged To prevent injury, lower implements to the ground, components. disengage all drives, engage parking brake, stop 3. Do not wear jewelry or loose fitting clothing when engine, and remove key from ignition switch before making adjustments or repairs.

  • Pagina 11: Servicing Front Deck

    ADJUSTMENTS SERVICING FRONT DECK___________________________________________________ The front deck can be raised and tilted up to improve arms. To prevent personal injury or damage to deck access to the cutting unit and blades for service and or lift arms, DO NOT allow deck to drop from service cleaning.

  • Pagina 12: Cutting Height

    ADJUSTMENTS CUTTING HEIGHT _________________________________________________________ Cutting height for decks can be adjusted from 1 to 5-1/2 in. (25-125 mm) in 1/2 in. (13 mm) increments. Actual Mount No. of Spacers Mount Height Location Under Mount Middle cutting height may vary somewhat from the heights given 1 1/2 Lower Upper...

  • Pagina 13: Lift Limit Switches

    ADJUSTMENTS LIFT LIMIT SWITCHES _____________________________________________________ The rotation of the cutting blades is controlled by limit 3. Shut OFF engine and remove key. Support decks switches positioned on the mower frame near the lift using blocks. This will prevent them from accidently arms for each deck.

  • Pagina 14: Neutral Adjustment

    ADJUSTMENTS NEUTRAL ADJUSTMENT ___________________________________________________ Important: The neutral adjustment on the drive pump is 7. Connect traction pedal linkage, Section 3.11, and preset at the factory on all new mowers and replacement install and adjust switches, Sections 3.8 and 3.9. pumps. Further adjustment is required only if the pump Important: Always check operation of Interlock System has been disassembled for service or neutral lever after replacing or adjusting switch.

  • Pagina 15: Forward Sensing Switch

    ADJUSTMENTS FORWARD SENSING SWITCH _______________________________________________ The forward sensing switch allows the mower to operate Switch open - Full reverse range of pedal. in four wheel drive only with the traction pedal in its 5. Connect switch to wiring harness and check forward position.

  • Pagina 16: Traction Pedal

    ADJUSTMENTS 3.11 PARKING BRAKE _________________________________________________________ 1. Check linkage and pivots to ensure they are operating smoothly. Inspect parking brake and CAUTION steering assist cables. DO NOT disengage the brakes with the engine off. 2. Park the mower on a 30% slope (16.7°) near the bottom of the hill, with the front of the mower facing 3.

  • Pagina 17: Steering Stop Bolts

    ADJUSTMENTS 3.14 STEERING STOP BOLTS ____________________________________________________ 1. Steering toe-in must be set before adjusting stop bolts. If toe-in is changed, stop bolts must be re- adjusted. 2. Turn stop bolts (P and Q) out as far as possible without removing them. 3.

  • Pagina 18: Torque Specification

    ADJUSTMENTS 3.15 TORQUE SPECIFICATION___________________________________________________ NOTICE All torque values included in these charts are approximate and are for reference only. Use of these torque values is at your sole risk. Jacobsen is not responsible for any loss, claim, or damage arising from the use of these charts. Extreme caution should always be used when using any torque value.

  • Pagina 19: Maintenance

    MAINTENANCE MAINTENANCE GENERAL ________________________________________________________________ b. Keep all moving parts properly adjusted and lubricated. WARNING Replace worn or damaged parts before operating Before you clean, adjust, or repair this equipment, the machine. disengage all drives, lower implements to the ground, d. Keep all fluids at their proper levels. engage parking brake, stop engine, and remove key from ignition switch to prevent injuries e.

  • Pagina 20: Sharpening Blades

    MAINTENANCE SHARPENING BLADES_____________________________________________________ 1. Place a wooden block between the blade and mower housing to stop the blade from moving. To remove blade, turn screw holding blade counterclockwise Maximum WARNING 1/2” (13 mm) The mower blades can develop sharp edges. Use caution whenever servicing and handling.

  • Pagina 21: Engine

    MAINTENANCE ENGINE _________________________________________________________________ IMPORTANT: A separate Engine Manual, prepared by consumption is not uncommon during the initial the engine manufacturer, is supplied with this break-in period. mower. Read the engine manual carefully until you 3. Change engine oil and oil filter element after first 50 are familiar with the operation and maintenance of hours of operation.

  • Pagina 22: Air Filter

    MAINTENANCE AIR FILTER_______________________________________________________________ Check the service indicator daily. Replace air cleaner 5. Check all hoses and air ducts. Tighten hose clamps. element immediately when red band becomes visible (A) Do not remove the element for inspection or cleaning. Unnecessary removal of the filter increases the risk of injecting dust and other impurities into the engine.

  • Pagina 23: Fuel System

    MAINTENANCE FUEL SYSTEM ____________________________________________________________ Refer to Section 5 for specific maintenance intervals. To change fuel filter: See Engine Manual for detailed procedures. 1. Close fuel valve on tank, then remove and discard the existing filter. Before replacing any filter, thoroughly clean the filter 2.

  • Pagina 24: Charging Battery

    MAINTENANCE 4.12 CHARGING BATTERY _____________________________________________________ 2. Whenever possible, remove the battery from the mower before charging. If battery is not sealed, WARNING check that the electrolyte covers the plates in all the cells. Charge battery in a well ventilated area. Batteries generate explosive gases.

  • Pagina 25: Hydraulic Oil

    MAINTENANCE 4.14 HYDRAULIC OIL___________________________________________________________ Refer to Section 6.2 for specific maintenance intervals. 2. Remove drain plug from bottom of tank. 3. After oil has drained install drain plug and fill with Drain and replace the hydraulic oil if you notice the Jacobsen Hydraulic Oil.

  • Pagina 26: Radiator & Oil Cooler

    MAINTENANCE 4.16 RADIATOR & OIL COOLER _________________________________________________ To remove screen, remove end cap (A) from left side of oil cooler. Slide screen out from side and blow out from WARNING back side using compressed air. To prevent serious bodily injury from hot coolant or Oil Cooler and Radiator steam blow-out, never attempt to remove the radiator cap while the engine is running.

  • Pagina 27: Care And Cleaning

    MAINTENANCE 4.18 CARE AND CLEANING _____________________________________________________ Clean the mower and implements after each use. Keep the Clean all plastic or rubber trim with a mild soap equipment clean. solution or use commercially available vinyl/rubber cleaners. Note: Shut off engine prior to cleaning. Do not wash any Repair damaged metal surfaces and use Jacobsen touch-up portion of the equipment while it is hot.
  • Pagina 28 MAINTENANCE Always check Interlock System after servicing the electrical system! K15 K16 K17 LTS 4WD CRS Wire Harness Label MR MC ML NT3 NT2 NT1 BK2 BK1 KYS KYA KYI Schematic Code Relay Description Function KYA / K2 Key Switch “A” Provide power to alternator IG circuit when ignition switch is in the RUN position and operator is seated.

  • Pagina 29: Efi Diagnostic Check

    MAINTENANCE 4.20 EFI DIAGNOSTIC CHECK ___________________________________________________ The electrical system is equipped with an OBD-II and Refer to the HR-9016 Technical Repair Manual for code Diagmaster diagnostic connectors located near the descriptions. engine controller. Plug an OBD-II reader into the matching connector, turn ignition switch to the ON position (do not start engine), and refer to the instructions included with the reader to retrieve diagnostic codes.

  • Pagina 30: Rollover Protection Structure (Rops)

    MAINTENANCE 4.22 ROLLOVER PROTECTION STRUCTURE (ROPS) ________________________________ A Rollover Protection System (ROPS) designed for this 1. The seat, the seat belt, mounting hardware, and any mower is available as an optional accessory. If your accessories within the ROPS, should be inspected mower is equipped with this device, inspect it periodically regularly, damaged...

  • Pagina 31: Troubleshooting

    TROUBLESHOOTING TROUBLESHOOTING GENERAL ________________________________________________________________ The troubleshooting chart below lists basic problems that may occur during start-up and operation. For more detailed information regarding the hydraulic and electrical systems contact your area Jacobsen Dealer. Symptoms Possible Causes Action Engine will not Parking brake disengaged Check Interlock System and start-up procedure.

  • Pagina 32: Maintenance And Lubrication Charts

    MAINTENANCE AND LUBRICATION CHARTS MAINTENANCE AND LUBRICATION CHARTS MAINTENANCE CHART ____________________________________________________ For smooth operation of pivot points and other friction points, apply several drops of SAE 30 oil every 50 hours WARNING or as required. Before you clean, adjust, or repair this equipment, Remove wheels and repack bearings once a year.

  • Pagina 33: Lubrication Chart

    MAINTENANCE AND LUBRICATION CHARTS LUBRICATION CHART______________________________________________________ HR014 Grease Fitting Locations F1 - 50 Hours (Every Week) F2 - 150 Hours Caster Spindles (10) Drive Shaft U-Joint Caster Wheel Axles (10) Drive Shaft Slip Joint Gauge Wheel Axles Return Canister Pivot Lift Cylinder - Front Deck Lift Arm - Front Deck Side Deck Pivots...

  • Pagina 34: Parts List

    PARTS LIST PARTS LIST HOW TO USE THE PARTS CATALOG _________________________________________ Abbreviations Indented Items Indented items indicate component parts that are N/S - Not serviced seperately, can only be obtained included as part of an assembly or another component. by ordering main component or kit. These parts can be ordered separetely or as part of the AR -Variable quantity or measurement is required main component.

  • Pagina 36: Aanbevolen Voorraadvorming

    ACMTRAD SL. gecontroleerd werden Motoruitlaatgassen product bevatten chemicaliën die naar de Staat Californië bekend is, kankerverwekkend © 2012, Jacobsen, A Textron Company/Textron Innovations Inc. “Alle rechten voorbehouden, inclusief het recht om dit handboek zijn geboorte- andere of enig deel ervan in enige vorm te reproduceren”.
  • Pagina 37 Inhoudsopgave VEILIGHEID Bedieningsveiligheid ........4 FOUTOPSPORING Belangrijke veiligheidsoverwegingen ....5 Algemeen ............31 SPECIFICATIES ONDERHOUD- EN SMEERSCHEMA Productidentificatie ..........6 Onderhoudsschema ........32 Maaieenheden ..........6 Smeerschema ..........33 Maaier ..............6 Motor ..............7 ONDERDELENCATALOGUS Gewichten en afmetingen ........7 De onderdelencatalogus gebruiken ....34 Accessoires &...

  • Pagina 38: Veiligheid

    VEILIGHEID VEILIGHEID BEDIENINGSVEILIGHEID ___________________________________________________ WAARSCHUWING EEN ONJUIST BEDIENDE MACHINE OF BEDIENING DOOR ONGETRAIND PERSONEEL KAN GEVAARLIJK ZIJN. Maak uzelf bekend met de plaats en het juiste gebruik van alle regelingen. Onervaren bedieners moeten instructies van iemand krijgen, die wel bekend is met de machine, voordat hij de machine mag bedienen. Veiligheid hangt af van de alertheid, zorg en voorzichtigheid van diegenen die de machine bedienen 12.

  • Pagina 39: Belangrijke Veiligheidsoverwegingen

    VEILIGHEID BELANGRIJKE VEILIGHEIDSOVERWEGINGEN _________________________________ Dit veiligheidssymbool wordt gebruikt om u te attenderen op potentiële gevaren. GEVAAR - Duidt op dreigende gevaarlijke situatie die, indien niet vermeden, ZAL resulteren in dood of ernstig letsel. WAARSCHUWING - Duidt op een potentieel gevaarlijke situatie die, indien niet vermeden, KAN resulteren in dood of ernstig letsel.

  • Pagina 40: Specificaties

    SPECIFICATIES SPECIFICATIES PRODUCTIDENTIFICATIE___________________________________________________ 70538H ......HR 9016 Turbo, 4-wielaandrijving 70539 ....... HR 9016 Turbo, 4-wielaandrijving ® met ROPS (antikantelbescherming) 70540......HR 9016 Turbo, 4-wielaandrijving EC met ROPS (antikantelbes- CHARLOTTE, NC PRODUCT OF U.S.A. 7053801651 cherming) 70541H ......HR 9016 Turbo, 4-wielaandrijving H ........

  • Pagina 41: Motor

    SPECIFICATIES MOTOR __________________________________________________________________ Merk ....... Kubota Regulateurinstelling: Model ......V3800 DICR-T-E2B Hoog stationair..2700 toeren/min Paardekracht....71,9 kW @ 2600 toeren/min Laagstationair ... 1050 toeren/min Opmerking: De werkelijk verkregen paardekracht is Smering: waarschijnlijk lager dan in de technische specificaties Inhoud ...... 13,2 l opgegeven vanwege werkingsbeperkingen...

  • Pagina 42: Conformiteitsverklaring

    Producentens firmanavn og fulde adresse Bedrijfsnaam en volledig adres van de fabrikant Tootja ärinimi ja täielik aadress Valmistajan toiminimi ja täydellinen osoite Nom commercial et adresse complète du fabricant Firmenname und vollständige Adresse des Herstellers Jacobsen, A Textron Company A gyártó üzleti neve és teljes címe Ragione sociale e indirizzo completo del fabbricante 11524 Wilmar Blvd.
  • Pagina 43 Místo a datum prohlášení Sted og dato for erklæringen Plaats en datum van de verklaring Deklaratsiooni väljastamise koht ja kuupäev Vakuutuksen paikka ja päivämäärä Lieu et date de la déclaration Jacobsen, A Textron Company Ort und Datum der Erklärung A nyilatkozat kelte (hely és id ) Luogo e data della dichiarazione 11524 Wilmar Blvd.

  • Pagina 44: Afstellingen

    AFSTELLINGEN AFSTELLINGEN ALGEMEEN ______________________________________________________________ 1. Afstellingen en onderhoud behoren altijd te worden WAARSCHUWING verricht door een bevoegd monteur. Als de gewenste afstelling niet kan worden uitgevoerd, neem dan con- tact op met een erkende Jacobsen Dealer. lichamelijk letsel voorkomen moeten voorafgaande aan afstellingen of uitvoering van 2.

  • Pagina 45: Serviceverlening Voordek

    AFSTELLINGEN SERVICEVERLENING VOORDEK _____________________________________________ Het voordek kan worden geheven en gekanteld om betere Om persoonlijke verwondingen of schade aan het dek toegang te krijgen tot de maaieenheden en messen ten of de hefarmen te voorkomen, zorg ervoor dat het dek behoeve van onderhoud en schoonmaken.

  • Pagina 46: Maaihoogte

    AFSTELLINGEN MAAIHOOGTE ____________________________________________________________ De maaihoogte van de dekken kan worden versteld van 25- montagevoorschriften op die op het decalplaatje zijn 125 mm, met een toename van 13 mm per keer. De feitelijke afgedrukt - Afb. 3F. maaihoogte kan iets verschillen van de gegeven hoogte, afhankelijk van de grasconditie en andere factoren.

  • Pagina 47: Hefbegrenzing-Schakelaars

    AFSTELLINGEN HEFBEGRENZING-SCHAKELAARS __________________________________________ De rotatie van de messen wordt bestuurd door 4. Positioneer schakelaar zodanig afslagschakelaars die op het tractorframe zijn bevestigd, sensorgedeelte (C) ervan is gecentreerd boven de bij de hefarmen voor ieder maaidek. Wanneer een dek oplopende kant (A) van de activeringsplaat op de omhoog wordt gebracht opent de schakelaar en worden hefarm.

  • Pagina 48: Neutraalafstelling

    AFSTELLINGEN NEUTRAALAFSTELLING ___________________________________________________ Belangrijk. De neutraalstand op de drijfpomp is een 6. Start de motor en observeer de wielen. Roteer fabrieksinstelling die geldt voor alle nieuwe tractors en beugel (F) in de sleufgaten totdat de wielen niet vervangingspompen. Verdere bijstelling is alleen vereist meer draaien.

  • Pagina 49: Sensorische Rijschakelaar

    AFSTELLINGEN SENSORISCHE RIJSCHAKELAAR ____________________________________________ De sensorische rijschakelaar zorgt ervoor dat de tractor Schakelaar gesloten tijdens volledige uitsluitend in vierwielaandrijving kan worden bediend achterwaartse bereik van de pedaal. wanneer de tractiepedaal in de vooruitstand staat. Bij 5. Verbind de schakelaar weer met de bedradings- achteruitrijden opent de schakelaar en keert de tractor bundel en controleer de werking van de vierwielaan- terug...

  • Pagina 50: Parkeerrem

    AFSTELLINGEN 3.11 PARKEERREM____________________________________________________________ 1. Controleer de koppeling en spillen op vlotte werking. VOORZICHTIG Controleer kabels handrem stuurbekrachtiging. Ontkoppel de remmen NIET terwijl de motor 2. Parkeer de maaier op een helling van 30% (16,7°) uitstaat. onderaan een helling en zorg dat de voorzijde van de maaier naar beneden wijst.

  • Pagina 51: Stuurstopbouten

    AFSTELLINGEN 3.14 STUURSTOPBOUTEN ______________________________________________________ 1. Toespoor stuur moeten worden gezet alvorens stuurstopbouten aan te passen. Wanneer toespoor wordt veranderd, moeten de stopbouten opnieuw worden afgesteld. 2. Draai stopbouten (P en Q) zo ver mogelijk naar buiten zonder ze te verwijderen. 3.

  • Pagina 52: Draaikoppelspecificatie

    AFSTELLINGEN 3.15 DRAAIKOPPELSPECIFICATIE _______________________________________________ LET OP Alle draaikoppelwaarden in deze tabellen zijn bij benadering en dienen uitsluitend als richtlijn. Gebruik van deze waarden is geheel voor eigen risico. Jacobsen kan niet verantwoordelijk worden gesteld voor enig verlies, enige aanspraak op of eis tot schadevergoeding als gevolg van het gebruik van deze tabellen.

  • Pagina 53: Onderhoud

    ONDERHOUD ONDERHOUD ALGEMEEN_______________________________________________________________ a. Houd de machine schoon. WAARSCHUWING b. Zorg dat alle bewegende delen op de juiste wijze worden afgesteld en gesmeerd. Voordat wordt begonnen aan het schoonmaken, Vervang versleten of beschadigde onderdelen afstellen of repareren van deze machine, dienen ter voordat de machine wordt bediend.

  • Pagina 54: Aanscherpen Van De Messen

    ONDERHOUD AANSCHERPEN VAN DE MESSEN ___________________________________________ 1. Plaats een houten blok tussen het mes en het maaierhuis om draaiing van het mes te voorkomen. Voor verwijdering van het mes dient de schroef die het vastzet linksom te worden gedraaid Max. 13 mm WAARSCHUWING De maaimessen kunnen scherpe randen ontwikkelen.

  • Pagina 55: Motor

    ONDERHOUD MOTOR __________________________________________________________________ BELANGRIJK: Bij deze tractor wordt een aparte 2. Controleer het motoroliepeil tweemaal per dag motorhandleiding meegeleverd die is samengesteld tijdens de eerste 50 bedrijfsuren. Een hoger dan door de motorfabrikant. Deze handleiding dient normaal olieverbruik is niet ongewoon tijdens de aandachtig worden doorgelezen...

  • Pagina 56: Luchtfilter

    ONDERHOUD LUCHTFILTER ____________________________________________________________ Controleer de service-indicator dagelijks. Vervang het 4. Bij het terugplaatsen van de kap dient te worden luchtfilterelement onmiddellijk wanneer de rode zone gezorgd dat deze volledig rond het filterhuis sluit. zichtbaar wordt (A). De stofuitdrijver (C) moet omlaagwijzen. 5.

  • Pagina 57: Brandstofsystem

    ONDERHOUD BRANDSTOFSYSTEM ______________________________________________________ sectie 4.23 voor specifieke perioden tussen Vervanging van het brandstoffilter: onderhoudsbeurten. Sluit de brandstofklep op de tank. Verwijder het oude fil- ter en ontdoe u ervan. Raadpleeg de Motorhandleiding voor gedetailleerde procedurebeschrijving. Breng een dun olielaagje aan op de pakking en draai het nieuwe filter handvast.

  • Pagina 58: Acculading

    ONDERHOUD 4.12 ACCULADING ____________________________________________________________ 1. Zie sectie 4.10. Lees de accu- en acculaderhan- WAARSCHUWING dleiding voor specifieke instructies. 2. Waar mogelijk dient de accu vóór het opladen uit de Acculading moet in een goed geventileerde ruimte tractor te worden gehaald. Als de accu niet is gebeuren.

  • Pagina 59: Hydrauliekolie

    ONDERHOUD 4.14 HYDRAULIEKOLIE _________________________________________________________ sectie 4.23 specifieke perioden tussen 2. Haal de aftapplug uit de bodem van de hoofdtank. onderhoudsbeurten. 3. Na het aftappen van de olie moet de aftapplug worden teruggeplaatst en de tank worden gevuld Na het falen van een belangrijk onderdeel dient de met Jacobsen hydrauliekolie.

  • Pagina 60: Radiateur & Oliekoeler

    ONDERHOUD 4.16 RADIATEUR & OLIEKOELER ________________________________________________ grille er opzij uit en reinig hem vanaf de achterkant met behulp van perslucht. WAARSCHUWING Oliekoeler en radiateur Om ernstig lichamelijk letsel te voorkomen als gevolg van ontsnappend heet koelmiddel of stoom, mag de Inspecteer de oliekoeler en de radiateur dagelijks en maak radiatordop nooit worden verwijderd zolang de motor ze waar nodig schoon om een goede luchtstroming te...

  • Pagina 61: Verzorging En Schoonmaken

    ONDERHOUD 4.18 VERZORGING EN SCHOONMAKEN ___________________________________________ Was de tractor en aanzetstukken na ieder gebruik. Houd de Reinig alle kunststof- en rubberranden met een milde uitrusting goed schoon. zeepoplossing of gebruik hiervoor in de handel verkri- jgbare vinyl/rubber schoonmaakmiddelen. Opmerking: Geen enkel deel van de machine mag worden gewassen zolang het nog warm is.
  • Pagina 62 ONDERHOUD Controleer altijd het back-up systeem van de bestuurder na een servicebeurt van het elektrisch systeem! K15 K16 K17 LTS 4WD CRS Label MR MC ML NT3 NT2 NT1 BK2 BK1 KYS KYA KYI bedradingsbundel Schematische code Relais Beschrijving Functie KYA / K2 Sleutel- Houdt de elektromagnetische brandstofstopklep open wanneer de contactschakelaar in de AAN-...

  • Pagina 63: Efi-Diagnosecontrole

    ONDERHOUD 4.20 EFI-DIAGNOSECONTROLE__________________________________________________ Het elektrische systeem is uitgerust met OBD-II- en Raadpleeg de Technische reparatiehandleiding HR-9016 Diagmaster-diagnoseaansluitingen in de buurt van de voor een beschrijving van de codes. motorregelaar. Stop een OBD-II-lezer in de overeenstemmende aansluiting, zet de contactschakelaar op 'AAN' (start de motor niet) en raadpleeg de instructies bij de lezer om de diagnosecodes te interpreteren.

  • Pagina 64: Rolbeugelsysteem (Rops)

    ONDERHOUD 4.22 ROLBEUGELSYSTEEM (ROPS) ______________________________________________ Er is een voor deze tractor ontworpen rolbeugelsysteem De zitting en veiligheidsriem, alsmede het montagema- (ROPS) verkrijgbaar als optioneel accessoire. Als uw tractor teriaal en alle accessoires van de rolbeugel dienen hiermee is uitgerust, inspecteer het dan regelmatig en volg regelmatig te worden geïnspecteerd en alle beschad- de bedieningsprocedures op die zijn opgenomen in de igde onderdelen moeten onmiddellijk worden vervan-...

  • Pagina 65: Foutopsporing

    FOUTOPSPORING FOUTOPSPORING ALGEMEEN_______________________________________________________________ Onderstaande foutopsporingstabel vermeldt basisproblemen die zich kunnen voordoen tijdens start-up en werking. Voor meer gedetailleerde informatie betreffende de hydraulische en elektrische systemen kunt u het beste contact opnemen met de Jacobsen Dealer in uw gebied. Symptomen Mogelijke oorzaken Actie Motor start niet.

  • Pagina 66: Onderhoud- En Smeerschema

    ONDERHOUD- EN SMEERSCHEMA 6.1 ONDERHOUDSSCHEMA _____________________________________________________ ONDERHOUD- EN SMEERSCHEMA Ten behoeve van soepele werking van alle hefbomen, WAARSCHUWING draai- andere frictiepunten niet smeerschema zijn afgebeeld, dienen deze iedere 50 uur of wanneer vereist een paar druppels SAE 30 olie te Alvorens te beginnen met schoonmaken, afstellen of krijgen.

  • Pagina 67: Smeerschema

    ONDERHOUD- EN SMEERSCHEMA SMEERSCHEMA___________________________________________________________ HR014 Smeerpunten F1 - 50 bedrijfsuren Aantal F2 - 150 bedrijftsuren Aantal (iedere week) Drijfas U-gewricht Zwenkwielspindels (10) Slipgewricht drijfas Zwenkwielassen (10) Draaipen retourfilterbus Spoorwielassen Hefcilinder - voorste dek Hefarm - voorste dek Zijdekdraaipennen Stuurcilinder Trekstang Asdraaipen Wieldraaipen Hefarm - zijdek...

  • Pagina 68: Onderdelencatalogus

    ONDERDELENCATALOGUS ONDERDELENCATALOGUS DE ONDERDELENCATALOGUS GEBRUIKEN __________________________________ Afkortingen Items met bullet point Een bullet point voorafgaande aan een item duidt op N/S - Non-serviced apart, uitsluitend verkrijgbaar samenstellende delen die tot een constructie of een door hoofdonderdeel of set te bestellen. ander onderdeel behoren.
  • Pagina 69 PARTS LIST PARTS CATALOG TABLE OF CONTENTS______________________________________ Body and Decals Hydraulics and Electrical 1.1 ..Decals-Mower..........36 33.1 ..Side Deck Valve Supply ......100 2.1 ..Hood ............38 34.1 ..Front Deck Valve Supply ......101 3.1 ..Cowlings and Skirts ........40 35.1 ..

  • Pagina 70: Body And Decals

    HR-9016 Serial No. All Body and Decals 1.1 Decals-Mower ® HR 9016 TURBO 4WD...
  • Pagina 71 HR-9016 Manufactured under one or more of the following U.S. patents: XXXXXXX 4181862 4125771 ® BRAKE 360053 4257090 4181864 3008521 WARNING This structure's proctective capability may be impaired by structural damage, overturn, or alteration. If any of these conditions occur, the structure must 5002952 be replaced.
  • Pagina 72 HR-9016 Serial No. All 2.1 Hood 9016-21...
  • Pagina 73 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 4256361 Hood 1003679 Pivot, Hood 3006644 Pin, Special Clevis 460028 Cotter pin, 1/8 x 1” 440120 Carriage Bolt, 3/8-16 x 1-1/4” 452008 Flat Washer, 3/8 446142 Lockwasher, 3/8 Heavy 443110 Nut, 3/8-16 Hex 354989 Stop, Rubber 443112...

  • Pagina 74: Cowlings And Skirts

    HR-9016 Serial No. All 3.1 Cowlings and Skirts 3 / 4 14 / 15 12 / 13 9016-24...
  • Pagina 75 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 447414 Lockwasher, 3/8 External Tooth 404118 Screw, 3/8-16 x 7/8” Truss Head 3006663 Left Side Cowling 3006664 Right Side Cowling 352604 Grommet 3005604 Receptacle, #85 1/4 Turn 3007704 Stud, #85 1/4 Turn 3005603 Retainer 443110...

  • Pagina 76: Seat Pan And Heat Shield

    HR-9016 Serial No. All 4.1 Seat Pan and Heat Shield 9016-25...
  • Pagina 77 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 3007032 Seat Pan 400264 Screw, 3/8-16 x 1-1/4” Hex Head 443110 Nut, 3/8-16 Hex 446142 Lockwasher, 3/8 Heavy 452008 Flat Washer, 3/8 5003457 Plate, Floorboard 404118 Screw, 3/8-16 x 7/8” Truss Head –...

  • Pagina 78: Control Panel Mounting

    HR-9016 Serial No. All 5.1 Control Panel Mounting...
  • Pagina 79 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 403745 Screw, #10-32 x 5/8” Hex Head 366670 Horn REFERENCE U11, See 66.1 453009 Flat Washer, 5/16 404022 Screw, 1/4-20 x 1” Truss Head 453023 Flat Washer, 1/4 446128 Lockwasher, 1/4 443102 Nut, 1/4-20 Hex 3009544 Relay, Time Delay...

  • Pagina 80: Instrument Panel

    HR-9016 Serial No. All Controls 6.1 Instrument Panel...
  • Pagina 81 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 4231940 Panel, Dash 403920 Screw, #10-24 x 1-1/4” Truss Head 366283 Handle 3006446 Switch, Test / 4WD-Reverse REFERENCE SW12 & SW14, See 66.1 4174684 Switch, PTO REFERENCE SW3, See 66.1 3006436 4WD Switch REFERENCE SW13, See 66.1 3006509 Hole Plug...

  • Pagina 82: Throttle Lever

    HR-9016 Serial No. All 7.1 Throttle Lever...
  • Pagina 83 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 4231901 Panel, Lift/Throttle Control 4229340 Sensor, Throttle REFERENCE U24, See 66.1 • Magnet, Sensor 800497 Screw, #10-24 x 3/4” Hex Socket 446116 Lockwasher, #10 402006 Screw, #6-32 x 1/2” Slotted 306506 Lockwasher, #6 4238243 Shaft, Throttle Pivot 521117...

  • Pagina 84: Lift Valve And Controls

    HR-9016 Serial No. All 8.1 Lift Valve and Controls...
  • Pagina 85 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 340061 Fitting, -6 ORFS x -6 ORB 90° 339909 • O-Ring, -6 ORFS 339897 • O-Ring, -6 ORB 1003611 Tube, Lift Valve to Backpressure 3006737 Hinge, Control Panel 404022 Screw, 1/4-20 x 1” Truss Head 453023 Flat Washer, 1/4 446128...

  • Pagina 86: Accelerator Pedal

    HR-9016 Serial No. All 9.1 Accelerator Pedal 9016-08...
  • Pagina 87 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1003244 Arm, Hydro Pedal 471214 • Grease Fitting 3010305 • Bushing 1003071 Shaft 400190 Screw, 5/16-18 x 1-1/4” Hex Head 453009 Flat Washer, 5/16 446134 Lockwasher, 5/16 443106 Nut, 5/16-18 Hex 1003145 Link, Hydro Control 366974 Rod End...

  • Pagina 88: Steering Assist

    HR-9016 Serial No. All 10.1 Steering Assist 26 27 Part of Frame Part of Frame Part of Frame Part of Frame...
  • Pagina 89 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1003794 Steering Assist Pedal 471214 • Grease Fitting 3010305 • Bushing 1003245 Shaft 452006 Flat Washer, 5/16 446134 Lockwasher, 5/16 443106 Nut, 5/16-18Hex 3006107 Spring, Pedal Return 400188 Screw, 5/16-18 x 1” Hex Head 4103163 Cable, Right Turn Assist 4103161...

  • Pagina 90: Parking Brake

    HR-9016 Serial No. All 11.1 Parking Brake View Rotated for clarity 18 19...
  • Pagina 91 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1003838 Parking Brake Lever • Stabilizer Bar 545234 • Clevis Pin 460004 • Cotter Pin 545237 • Spacer 3006108 Cable, Parking Brake 3008548 Mount, Brake Lever 3008874 Plate, Switch Mount 441672 Carriage Bolt, 5/16-18 x 2-1/2” 453009 Flat Washer, 5/16 446134...
  • Pagina 92 HR-9016 Serial No. 70538 All Frame 12.1 Frame Serial No. 70541 All 20 19 9016-02...
  • Pagina 93 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes Frame 1002889 Cross Frame 1002895 Cylinder Mount, Right 1002896 Cylinder Mount, Left 400416 Screw, 1/2-13 x 2-1/2” Hex Head 446154 Lockwasher, 1/2 Heavy 443118 Nut, 1/2-13 Hex 4226721 Bracket, Right Radiator 4226720 Bracket, Left Radiator 400616 Screw, 5/8-11 x 2”...

  • Pagina 94: Frame With Rops

    HR-9016 Serial No. 70539 All 13.1 Frame With ROPS Serial No. 70540 All P/O 34 9016-02...
  • Pagina 95 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes Frame 1002889 Cross Frame 1002895 Cylinder Mount, Right 1002896 Cylinder Mount, Left 400416 Screw, 1/2-13 x 2-1/2” Hex Head 446154 Lockwasher, 1/2 Heavy 443118 Nut, 1/2-13 Hex 4226721 Bracket, Right Radiator 4226720 Bracket, Left Radiator 400616 Screw, 5/8-11 x 2”...

  • Pagina 96: Axle Assembly

    HR-9016 Serial No. All 14.1 Axle Assembly 3 / 10 As Required...
  • Pagina 97 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes – Steering Axle See 15.1 1003001 Pivot Shaft 3006475 Washer, 3/32” Thick Thrust 363766 Washer 445642 Nut, 1-1/2 -12 Slotted Hex 460072 Cotter Pin, 1/4 x 2-1/2” 400408 Screw, 1/2-13 x 1-1/2” Hex Head 446152 Lockwasher, 1/2 443118...

  • Pagina 98: Steering Axle

    HR-9016 Serial No. All 15.1 Steering Axle 9016-38...
  • Pagina 99 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 4209060 Wheel Motor See 58.1 460030 Cotter Pin, 1/8 x 1-1/4” 443842 Nut, 1-1/8 -12 Hex Jam 401208 Screw, 1/2-13 x 1-3/4” Grade 8 5003530 Frame, RH Wheel Motor 5003529 Frame, LH Wheel Motor 4236722 Hub, Wheel 5003526...

  • Pagina 100: Battery Tray

    HR-9016 Serial No. All 16.1 Battery Tray...
  • Pagina 101 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 440078 Bolt, Carriage 5/16-18 x 3/4” 440118 Bolt, Carriage 3/8-16 x 1” 443106 Nut, 5/16-18 Hex 443110 Nut, 3/8-16 Hex 446134 Lockwasher, 5/16 446142 Lockwasher, 3/8 Heavy 452006 Flat Washer, 5/16 453011 Flat Washer, 3/8 3008461 Angle, Battery Clamp...

  • Pagina 102: Tilt Steering

    HR-9016 Serial No. All 17.1 Tilt Steering ®...
  • Pagina 103 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 4253491 Steering Tower 4256510 Bracket, Steering Pump 4247830 Valve, Steering 4197940 • Seal Kit 64205-054 Screw, M8-1.25 x 130 mm Hex Head 450411 Lockwasher, M8 4211400 Spacer, Steering Valve 4212980 Shaft, Steering 443828 •...

  • Pagina 104: Engine And Radiator

    HR-9016 Serial No. All Engine and Radiator 18.1 Radiator To Engine 9016-12...
  • Pagina 105 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 4228260 Firewall, Radiator 440120 Carriage Bolt, 3/8-16 x 1-1/4” 4226721 Bracket, Right Radiator See 12.1 or 13.1 4226720 Bracket, Left Radiator See 12.1 or 13.1 452008 Flat Washer, 3/8 446142 Lockwasher, 3/8 Heavy 443110 Nut, 3/8-16 Hex 4139109...

  • Pagina 106: Radiator Screen

    HR-9016 Serial No. All 19.1 Radiator Screen...
  • Pagina 107 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1003942 Screen 3008561 Guide, Screen 409804 Screw, #10-24 x 1/2” Thread Cut 3009095 Seal, Neoprene 3008554 Cap, Right Side 2810634 Cap, Left Side 3010014 Shield, Screen 440082 Carriage Bolt, 5/16-18 x 1” 4227161 Angle, Cooler Top 3008563...

  • Pagina 108: Remote Engine Oil Filter

    HR-9016 Serial No. All 20.1 Remote Engine Oil Filter...
  • Pagina 109 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 450190 Screw, M8-1.25 x 16 Hex Head 4136120 Adaptor, Oil Filter Part of Engine 4137099 Adaptor, 90°, 3/8 NPTF x -8 ORFS 339910 • O-Ring, -8 ORFS 4133342 O Ring Part of Engine 4133240 Plug, Oil Filter Part of Engine...

  • Pagina 110: Air Cleaner And Muffler

    HR-9016 Serial No. All 21.1 Air Cleaner and Muffler View rotated 180° for clarity.
  • Pagina 111 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 4227360 Bracket, Heat Shield 361898 Screw, M8-1.25 x 16 mm Hex Head 4220060 Engine, V3800 453009 Flat Washer, 5/16 446136 Lockwasher, 5/16 Heavy 443106 Nut, 5/16-18 Hex 440082 Carriage Bolt, 5/16-18 x 1” 4233420 Heat Shield 440084...

  • Pagina 112: Engine Mounting

    HR-9016 Serial No. All 22.1 Engine Mounting...
  • Pagina 113 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes – Engine and Pump Assembly See 23.1 4261130 Mounting Hardware Part of Engine 3008821 Temperature Sender REFERENCE U6, See 66.1 4136286 Engine Mount, Right Hand 4136285 Engine Mount, Left Hand 4132013 Engine Mount, Rear 365979 Screw, M12-1.25 x 25mm Hex Head 446154...

  • Pagina 114: Engine And Pump Assembly

    HR-9016 Serial No. All 23.1 Engine and Pump Assembly...
  • Pagina 115 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 4220060 Kubota Engine Assembly 4137894 • Engine Oil Filter 4138120 • Fan Belt 4230980 • Fuel Filter Cartridge 339989 Fitting, -10 ORFS x -10 ORB Striaght 339911 • O-Ring, -10 ORFS 339899 •...

  • Pagina 116: Tank Mounting

    HR-9016 Serial No. All Tanks 24.1 Tank Mounting...
  • Pagina 117 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 3006264 Tank, Hydraulic oil 3008808 Cap, Breather Filler 3009203 Sensor, Oil Level REFERENCE SW11, See 66.1 839918 • Connector, 2 Wire Deustch 825357 • Pin, Deustch 839935 • Wedge Lock 339900 • O-Ring, SAE -12 441689 Carriage Bolt, 1/2-13 x 8-1/2”...

  • Pagina 118: Fuel Tank

    HR-9016 Serial No. All 25.1 Fuel Tank...
  • Pagina 119 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 3006265 Tank, Fuel 441689 Carriage Bolt, 1/2-13 x 8-1/2” 3009236 Wall, Fender 452012 Flat Washer, 1/2 443118 Nut, 1/2-13 Hex 4177480 Cap, Fuel 3006639 Sender, Fuel REFERENCE U4, See 66.1 403910 Screw, #10-24 x 1/2” Truss Head 340481 Cover, Sender 400188...

  • Pagina 120: Fuel Routing

    HR-9016 Serial No. All 26.1 Fuel Routing Engine Rotated 180 Degrees For Clarity 23 24...
  • Pagina 121 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 3006265 Tank, Fuel See 25.1 361117 Bushing 2810702 Valve, Needle 4 48540-01 Clamp, Hose 554748 Fuel Line, Tank to Sedimentor 10 Ft. Roll, Cut to Length, 5/16” I.D. 4225760 Sedimentor Included with Engine 4251726 •...

  • Pagina 122: Pump And 4Wd Valve Mounting

    HR-9016 Serial No. All Traction Pump 27.1 Pump and 4WD Valve Mounting...
  • Pagina 123 Item Part No. Qty. Description Serial Numbers/Notes 339999 Fitting, -16 ORFS x -16 ORB Straight 339913 • O-Ring, -16 ORFS 339901 • O-Ring, -16 ORB 4135556 4WD Valve with Oil Shuttle See 64.1 400406 Screw, 1/2-13 x 1-1/4” Hex Head 446154 Lockwasher, 1/2 Heavy 453017...

  • Pagina 124: Lift Arms And Deck Valves

    HR-9016 Serial No. All Lift Arms and Deck Valves 28.1 Front Lift Arms and Cylinders...
  • Pagina 125 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1002785 R.H. Front Lift Arm 1003900 L.H. Front Lift Arm 342033 • Bushing 471214 • Grease Fitting 3006490 Bracket, Front Deck Pivot 3007091 Angle, R.H. Valve Mount 3007092 Angle, L.H. Valve Mount 400412 Screw, 1/2-13 x 2”...

  • Pagina 126: Front Deck Latch

    HR-9016 Serial No. All 29.1 Front Deck Latch 9016-05...
  • Pagina 127 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1003483 Brace, Stand Up 365826 Spacer 400430 Screw, 1/2-13 x 5-1/2” Hex Head 1003277 Pin, Cylinder Rod End 446154 Lockwasher, 1/2 Heavy 443118 Nut, 1/2-13 Hex 1003484 Latch, Front Deck 352936 • Bushing 3008472 Spring, Torsion 441690...

  • Pagina 128: Side Lift Arms

    HR-9016 Serial No. All 30.1 Side Lift Arms 21 / 22 23 / 24 1 / 2 13 / 14...
  • Pagina 129 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1005016 Pivot, Left Side Arm 1005017 Pivot, Right Side Arm 304569 • Bushing 332351 • Bushing 471214 • Grease Fitting 3006294 Plate, Side Arm Pivot 3006295 Plate, Side Arm Pivot 400412 Screw, 1/2-13 x 2” Hex Head 446154 Lockwasher, 1/2 Heavy 444758...

  • Pagina 130: Side Lift Cylinders And Return Canisters

    HR-9016 Serial No. All 31.1 Side Lift Cylinders and Return Canisters...
  • Pagina 131 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 5003371 Canister, Deck Return See 59.1 1003823 Pin, Canister Mount 400266 Screw, 3/8-16 x 1-1/2” Hex Head 446140 Lockwasher, 3/8 443110 Nut, 3/8-16 Hex 3009535 Pin, Shear 458039 Retaining Ring 455004 Flat Washer 453011 Flat Washer, 3/8 3006293...

  • Pagina 132: Deck Valves

    HR-9016 Serial No. All 32.1 Deck Valves Front Deck Valve 9 10 Right Wing Valve Left Wing Valve...
  • Pagina 133 Item Part No. Qty. Description Serial Numbers/Notes 4135582 Valve, Deck See 63.1 339989 Fitting, -10 ORFS x -10 ORB Straight 339911 • O-Ring, -10 ORFS 339899 • O-Ring, -10 ORB 441624 Carriage Bolt, 3/8-16 x 1” 340070 Fitting, -10 ORFS x -10 ORB 90° 339911 •...

  • Pagina 134: Hydraulics And Electrical

    HR-9016 Serial No. All Hydraulics and Electrical 33.1 Side Deck Valve Supply 1 11 Item Part No. Qty. Description Serial Numbers/Notes 400264 Screw, 3/8-16 x 1-1/4” Hex Head 446142 Lockwasher, 3/8 Heavy 443110 Nut, 3/8-16 Hex 4135253 Plate, Tube Mounting 4135262 Hose, Pump to left Side 4135408...

  • Pagina 135: Front Deck Valve Supply

    HR-9016 Serial No. All 34.1 Front Deck Valve Supply Item Part No. Qty. Description Serial Numbers/Notes 400264 Screw, 3/8-16 x 1-1/4” Hex Head 452008 Flat Washer, 3/8 446142 Lockwasher, 3/8 Heavy 443110 Nut, 3/8-16 Hex 1003607 Hose, Pump to Left Front Valve 4135589 Hose, Pump to Right Front Valve 339963...

  • Pagina 136: Pump Supply

    HR-9016 Serial No. All 35.1 Pump Supply Item Part No. Qty. Description Serial Numbers/Notes 4135240 Hose, Rear Pump Suction 4136342 Clamp 4148900 Hose, Rear Pump Inlet 4135233 Manifold, Rear Pump Suction > 4136343 Plate, Clamp 359615 Clamp, Hose 326112 Clamp, Hose 400208 Screw, 5/16-18 x 4-1/2”...
  • Pagina 137 HR-9016 Serial No. 36.1 Return Manifold Item Part No. Qty. Description Serial Numbers/Notes 1003891 Return Manifold 400266 Screw, 3/8-16 x 1-1/2” Hex Head 452008 Flat Washer, 3/8 446140 Lockwasher, 3/8 3007061 Hose, Return 3008820 Clamp, Double Hose 359615 Clamp, Hose >...

  • Pagina 138: Traction Hydraulics

    HR-9016S Serial No. All 37.1 Traction Hydraulics To Bottom Port Right Rear Wheel Motor To Top Port Right Rear Wheel Motor To Port 1 4WD Valve To Port 3 4WD Valve To Port 2 To Bottom Port 4WD Valve Left Rear Wheel Motor To Top Port Left Rear Wheel Motor To Port 4...
  • Pagina 139 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1002769 Wheel Motor, Front See 14.1 340074 Fitting, -12 ORFS x -12 ORB 90° 339912 • O-Ring, -12 ORFS 339900 • O-Ring, -12 ORB 4135556 4WD Valve with Oil Shuttle See 27.1 Pump Assembly See 27.1 339990...

  • Pagina 140: Oil Cooler Hydraulics

    HR-9016 Serial No. All 38.1 Oil Cooler Hydraulics Part of Cross Frame...
  • Pagina 141 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1003891 Return Manifold See 36.1 1003988 Manifold, Cooler Inlet 339966 Locknut, -20 ORFS Bulkhead 339911 O-ring, SAE #10 1003862 Tube, Right Front Valve to Inlet 1003860 Tube, Right Side Valve to Inlet 1003861 Tube, Left Side Deck to Inlet 4227982...

  • Pagina 142: Return Hydraulics

    HR-9016 Serial No. All 39.1 Return Hydraulics Right Wing Deck Motors Case Drain Right Rear Wheel Motor Case Drain Front Deck Motors Left Rear Wheel Motor Case Drain Case Drain Left Side 4WD Valve Right Front Wheel Motor Case Drain Left Wing Deck Motors Case Drain Left Front Wheel Motor...
  • Pagina 143 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1003891 Return Manifold See 36.1 1003573 Hose, Pump to Return Manifold 1003575 Hose, 4WD Valve to Pump 339911 O-Ring, SAE #10 Face Seal 340065 Fitting, -8 ORFS x -6 ORB 90° 4WD Valve Port T 339910 •...

  • Pagina 144: 4Wd Hose Clamps

    HR-9016 Serial No. All 40.1 4WD Hose Clamps 13 / 5 Valve Supply Hoses Wire Harness Rear Motor Hoses 11 9 Item Part No. Qty. Description Serial Numbers/Notes 400210 Screw, 5/16-18 x 5” Hex Head 366114 Spacer 3008792 Spacer Plate 3008793 Clamp, Double Hose 366424...

  • Pagina 145: Charge Pressure

    HR-9016 Serial No. 41.1 Charge Pressure 9016-40 Item Part No. Qty. Description Serial Numbers/Notes 340069 Fitting, -10 ORFS x -10 ORB 90° 339911 • O-Ring, -10 ORFS 339898 • O-Ring, -8 ORB 340217 Tee, -10 ORFS Bulkhead Run 339911 • O-Ring, -10 ORFS 339963 Locknut, Bulkhead 340377...

  • Pagina 146: Lift Valve Hydraulics

    HR-9016 Serial No. All 42.1 Lift Valve Hydraulics To Fitting Hose Labled Destination Right Side Cylinder Base End Right Side Cylinder Rod End Left Side Cylinder Base End Left Side Cylinder Rod End Front Lift Cylinder Rod End Tee Steering Valve AUX Port Important: The hoses must be routed through the retaining clamp in the order shown to allow proper clearance of the heat shield.
  • Pagina 147 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 4244654 Hose, Right Side Cylinder Base End 1003600 Hose, Right Side Cylinder Rod End 1003601 Hose, Left Side Cylinder Base End 1003602 Hose, Left Side Cylinder Rod End 340167 Fitting, -6 ORFS 90° Bulkhead 339909 •...

  • Pagina 148: Power Steering Hoses

    HR-9016 Serial No. All 43.1 Power Steering Hoses Hose (8) Hose (6) From Pump To Return Manifold Hose (7) To Lift Valve Hose (5) To Steering Cylinder Hose (5) To Steering Cylinder To Lift Valve...
  • Pagina 149 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes > 1003876 Tube, RT Hose to Rod End Hose 1003875 Tube, LT Hose to Base End Hose 339961 Locknut, Bulkhead 339909 O-Ring, -6 ORFS 1003606 Hose, Valve to Cylinder Tubes 1003593 Hose, Valve to Return Manifold 4238602 Hose, Steering Valve to Lift Valve See 42.1 for other end of hose.

  • Pagina 150: Engine Harness Assembly

    HR-9016 Serial No. All 44.1 Engine Harness Assembly Kubota Harness Chassis Harness OBDII Diagmaster Views rotated for clarity.
  • Pagina 151 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 3000359 Circuit Breaker, 50 Amp REFERENCE CB1, See 66.1 364774 Boot, Protective 4282031 Relay, Air Intake Heater REFERENCE K14, See 66.1 400106 Screw, 1/4-20 x 5/8” Hex Head 443102 Nut, 1/4-20 Hex 446130 Lockwasher, 1/4 Heavy 364190...

  • Pagina 152: Chassis Harness Assembly

    HR-9016 Serial No. All 45.1 Chassis Harness Assembly Console Harness Kubota Harness Connections Connections 1 - Throttle Position Sensor 9 - Console Harness 2 - Keyswitch Harness Connections 8 - Keyswitch 3 - Horn 7 - Relays 4 - Gauges 5 - Panel Switches 6 - Relays Chassis Harness Connections...
  • Pagina 153 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 4228700 Harness, Console Connection References 1~6 555846 • Diode 4166721 Harness, Ignition Switch Connection References 7~9 4228681 Harness, Chassis Connection References A~Z 364973 Clamp, Harness 452008 Flat Washer, 3/8 400260 Screw, 3/8-16 x 7/8” Hex Head 446142 Lockwasher, 3/8 Heavy 473142...

  • Pagina 154: Decals - Decks

    HR-9016 Serial No. All Decks 46.1 Decals - Decks 4181863 Mount Number of Spacers Middle Height Location Under Mount Lower Upper 1-1/2 Lower Thrust Mount Lower Washer 2-1/2 Lower Leveling 2-1/2 Middle Washer Middle 3-1/2 Middle Lower Middle Spacers Under Upper Mount 4-1/2...
  • Pagina 155 HR-9016 Front Left Wing Right Wing Item Part No. Qty. Description Serial Numbers/Notes 3009317 Decal, Caster Cut Height 3009318 Decal, Gage Wheel Cut Height 4181863 Decal, Read Manual for Service 4164381 Decal, Danger 4257090 Decal, Crush Warning > Change from previous revision...

  • Pagina 156: Front Deck

    HR-9016 Serial No. All 47.1 Front Deck 13 14 9016-57...
  • Pagina 157 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 1003430.6 Hinge Assembly 400286 Screw, 3/8-16 x 2-3/4” Hex Head 446142 Lockwasher, 3/8 Hvy 444762 Locknut, 3/8-16 Center 400264 Screw, 3/8-16 x 1-1/4” Hex Hd 453011 Flat Washer, 3/8 3007678 Pin, Clevis 460050 Cotter Pin, 3/16 x 1-1/4”...

  • Pagina 158: Front Deck Center Section

    HR-9016 Serial No. All 48.1 Front Deck Center Section 9 / 10 18 16 Front Case Case Drain Drain Inlet Inlet Outlet Outlet Case Drain Outlet Motor Orientation...
  • Pagina 159 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 5003188 Deck, Front Assembly 352936 • Bushing 4256471 Motor, Spindle Assembly 5003763 • Seal Kit 2811954 • Bushing 4115706 • Valve, Check 557523 • Key, 1/4 x 1/4 x 1" Serial Plate, Front Deck 440124 Carriage Bolt, 3/8-16 x 1-3/4”...

  • Pagina 160: Front Deck Winglets

    HR-9016 Serial No. All 49.1 Front Deck Winglets (Right Winglet Shown) Front Inlet Outlet Case Case Drain Drain Motor Orientation Outlet Inlet Left Winglet Right Winglet 9016-55...
  • Pagina 161 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 5003186 Deck, RH Winglet 5003187 Deck, LH Winglet 4256471 Motor, Spindle Assembly 5003763 • Seal Kit 2811954 • Bushing 4115706 • Valve, Check 557523 • Key, 1/4 x 1/4 x 1" 366613 Shim 440124 Carriage Bolt, 3/8-16 x 1-3/4”...

  • Pagina 162: Front Deck Hydraulics

    HR-9016 Serial No. All 50.1 Front Deck Hydraulics Right Winglet Motor Center Motor E - To Return Manifold Right Center Motor Left Center Motor Left Winglet Motor...
  • Pagina 163 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 340070 Fitting, -10 ORFS x -10 ORB 90° 339911 • O-Ring, -10 ORFS 339899 • O-Ring, -10 ORB 339989 Fitting, -10 ORFS x -10 ORB Straight 339911 • O-Ring, -10 ORFS 339899 •...

  • Pagina 164: Wing Decks

    HR-9016 Serial No. All 51.1 Wing Decks Right Wing Shown 20 / 21 1 / 2 25 23 Inlet Outlet Case Case Drain Drain Front Outlet Inlet Outlet Inlet Outlet Inlet Inlet Outlet Case Case Case Case Drain Drain Drain Drain Outlet Inlet...
  • Pagina 165 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 5003190 Deck, Right Wing 5003189 Deck, Left Wing 4256471 Motor, Spindle Assembly 5003763 • Seal Kit 2811954 • Bushing 4115706 • Valve, Check 557523 • Key, 1/4 x 1/4 x 1" Wing Deck Serial Plate 440124 Carriage Bolt, 3/8-16 x 1-3/4”...

  • Pagina 166: Wing Deck Hydraulics

    HR-9016 Serial No. All 52.1 Wing Deck Hydraulics Right Outside Motor Right Center Right Inside Motor Motor Right Wing Deck Hydraulics 12 13 Left Inside Motor Left Center Motor Left Outside Motor Left Wing Deck Hydraulics...
  • Pagina 167 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 340070 Fitting, -10 ORFS x -10 ORB 90° 339911 • O-Ring, -10 ORFS 339899 • O-Ring, -10 ORB 339989 Fitting, -10 ORFS x -10 ORB Straight 339911 • O-Ring, -10 ORFS 339899 •...

  • Pagina 168: Caster Assemblies

    HR-9016 Serial No. All 53.1 Caster Assemblies Item Part No. Qty. Description Serial Numbers/Notes 1004276.6 Yoke, 11” Tire Wing Decks Only 1004275.6 Yoke, 13” Tire Front Deck Only 1004277.6 Tube, Yoke Pivot 363539 • Bushing 471214 • Grease Fitting 366593 Spacer, Caster Wheel 365772 Spacer, Caster Wheel...

  • Pagina 169: Wheel And Tire Assemblies

    HR-9016 Serial No. 54.1 Wheel and Tire Assemblies Part Numbers 4256572 and 4253030 Item Part No. Qty. Description Serial Numbers/Notes 4250772 Tire, 11 x 4-5 Smooth 4256572 Only 4253050 Tire, 13 x 6.5-6.5 Multi Rib 4253030 Only 4256573 Wheel, 5 x 3 4256572 Only 4253031 Wheel, 6 x 4.5...

  • Pagina 170: Gage Wheels And Latch

    HR-9016 Serial No. All 55.1 Gage Wheels and Latch 18 / 19...
  • Pagina 171 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 461495 Clevis pin, 1/2 x 2-1/2” 460028 Cotter Pin, 1/8 x 1” 1003423.6 Yoke, Gage Wheel 3007442 Spacer, Arm Pivot 3004113 Bushing 441690 Carriage Bolt, 1/2-13 x 7” 446152 Lockwasher, 1/2 443118 Nut, 1/2-13 Hex 3007679 Clevis Pin, 5/8 x 9-5/16”...

  • Pagina 172: Air Suspension

    HR-9016 Serial No. All 56.1 Air Suspension Part No. 5003625 9016-62...
  • Pagina 173 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes Lower Housing Scissors Upper Housing 5003627 Compressor Kit REF M5, See 66.1 • Compressor • Tie Wrap • Clamp, Compressor • Tie Wrap • Bushing, Strain 5003628 Air Fitting/Tubing Kit • Braided Sleeve •...

  • Pagina 174: Steering Cylinder

    HR-9016 Serial No. All 57.1 Steering Cylinder Part No. 4113656...
  • Pagina 175 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 4113655 Seal Kit • Retaining Ring • O-Ring, Piston • Seal, Piston • Seal, Rod • Wiper • Backup Ring, Gland • O-Ring, Gland 443126 Nut, 5/8-11 Hex 5003543 Socket Assembly 4115591 Piston and Rod Screw, Piston 471214...
  • Pagina 176 HR-9016 Serial No. All 58.1 Rear Wheel Motor Serial No. All Part Number 4209060 19 20 Included In Rear Motor Seal Kit 4178564 Included In Front Shaft Seal Kit 4200921 Item Part No. Qty. Description Serial Numbers/Notes 558066 Screw, Torx Front Retainer 558063 Shaft and Bearing Kit...

  • Pagina 177: Deck Return Canister

    HR-9016 59.1 Deck Return Canister Part Number 5003371 9016-47 Item Part No. Qty. Description Serial Numbers/Notes O-Ring Back Up Ring Loaded U-Cup Rod Wiper 471214 Grease Fitting 443132 Nut, 3/4-16 Hex 5003428 Collar Assembly 5003427 Seal Kit Gold Star Return Canisters 5003662 Seal Kit HDM Return Canisters...

  • Pagina 178: Lift Valve

    HR-9016 Serial No. All 60.1 Lift Valve Part Number 1001802 ■ ■ ■ ■ 9016-48...
  • Pagina 179 HR-9016 Item Part No. Qty. Description Serial Numbers/Notes 558005 Plug Assembly, Relief Valve 500745 Plug Assembly, Port Adapter 545914 Spring, Lockout Poppet Assembly 500746 Seat Assembly 6 5001599 Plunger, Lockout 7 5001603 Plunger, Lockout 558004 Cap Assembly 558007 Retaining Ring 10 5001613 Seat 558011...

  • Pagina 180: Front Lift Cylinder

    HR-9016 Serial No. All 61.1 Front Lift Cylinder Part Number 4138587 Item Part No. Qty. Description Serial Numbers/Notes ● PSP Seal ● Back Up Ring ● O-Ring ● O-Ring ● Back Up Ring ● Internal Snap Ring ● External Snap Ring ●...

  • Pagina 181: Wing Lift Cylinders

    HR-9016 Serial No. All 62.1 Wing Lift Cylinders Part Number 4138521 1 2 3 Item Part No. Qty. Description Serial Numbers/Notes ● PSP Seal ● Back Up Ring ● O-Ring ● O-Ring ● Back Up Ring ● Internal Snap Ring ●...

  • Pagina 182: Deck Valve

    HR-9016 Serial No. All 63.1 Deck Valve Part Number 4135582 4 / 5/ 6 Item Part No. Qty. Description Serial Numbers/Notes 5002911 Relief Valve 5003579 • Seal Kit 5002912 Relief Valve 5003554 • Seal Kit 3010199 Plug, SAE #6 Located opposite Diagnostic port 339897 •...
  • Pagina 183 HR-9016 Serial No. 64.1 4WD Valve Part Number 4135556 6 / 7 4 / 5 9016-52 Item Part No. Qty. Description Serial Numbers/Notes 5003342 Check Valve 5003582 • Seal Kit 5003344 Shuttle, Hot Oil 5003582 • Seal Kit 5003346 3-Way Spool 5003583 •...

  • Pagina 184: Traction Pump

    HR-9016 Serial No. All Schematics 65.1 Hydraulic Schematic Engine Valve 4387 psi 2.81 ci 2400 RPM Transport 1.28 ci 1.28 ci 1.28 ci .49 ci 4387 psi 2700 RPM Traction Pump 313 psi .98 ci Typ (11 Places) Right Wing Deck Valve Right Wing Motors...

  • Pagina 185: Steering Cylinder

    HR-9016 Front Wheel Rear Motors 12.56 ci Wheel Motors 12.5 ci 12.5 ci 12.56 ci .031 4WD Valve Steering Cylinder Steering Valve Backpressure Valve 30 ~ 275 psi Lift Valve 1500 psi 300 psi 300 psi 300 psi .0595" .0595" Right Wing Left Wing Right Front...

  • Pagina 186: Electrical Schematic

    HR-9016 Serial No. All 66.1 Electrical Schematic Mow, 4WD, and Cruise Control Circuits Vt/Ye Vt/Ye Vt/Ye DGn/Wh Wh/Bu Wh/Bu DGn/Og DGn/Wh Vt/Ye DGn/Wh DGn/Wh SOL5 DGn/Wh DGn/Wh DGn/Wh SW19 SW18 DGn/Og DGn/Og DGn/Rd DGn/Wh SOL7 SW12 SW10 Gy/Bk Wh/Bk Wh/Bk Wh/Bk Pk/Wh Pk/Wh...
  • Pagina 187 HR-9016 66.1 Electrical Schematic Interlock, Starting, Gauges, and Seat Control Circuits Vt/Ye 4 3 2 1 Og/Bu Vt/Ye Og/Gn Og/Gn Ye/Gn Og/Gn Rd/Bu Og/Gn Bn/Ye Bn/Ye 2-10 Rd/Bu Og/Bn Ye/Gn Ye/Gn Og/Bn Og/Bu Gy/Bu Og/Gn Wh/Bu Gy/Wh Og/Gn SW15 Gy/Ye Gy/Wh Gy/Bu Og/Gn...
  • Pagina 188 HR-9016 66.1 Electrical Schematic Engine Control Circuits Wh/Bk Wh-41 Wh/Rd Wh-42 7-33 Gy/Rd Wh-38 7-41 Wh-61 7-26 Wh-62 7-28 Wh-63 Wh-63 Rail Pressure Gnd 7-39 Wh-41 Boost Sesnor Gnd Bu/Rd Wh-40 Wh-40 Coolant Temp Sensor Gnd 7-13 Wh-39 Wh-94 1kΩ Crank Angle Sensor Gnd 7-38 Wh-90...
  • Pagina 189 HR-9016 Reference Part Item Description Serial Numbers/Notes Illustration Number See 16.1 Battery See 16.1 Battery See 44.1 3000359 50 Amp Circuit Breaker - Main See 44.1 4237462 90 Amp Circuit Breaker - Engine See 6.1 555846 Interlock System Diode See 6.1 555846 Test Diode See 6.1...
  • Pagina 190 HR-9016 Reference Part Item Description Serial Numbers/Notes Illustration Number Not Shown 4251788 EGR Valve Not Shown 4251717 Suction Valve See 56.1 5003627 Seat Air Ride Compressor Not Shown 4251772 Heater, Intake Air Not Shown Resistor, 1kΩ SOL1 SOL2 See 63.1 4134530 Left Wing Mow Solenoid Coil Included in 1004337 Deck Valve...
  • Pagina 191 Reference Part Item Description Serial Numbers/Notes Illustration Number Not Shown 4251850 Cam Position Sensor Not Shown 4251738 Fuel Rail Pressure Sensor Included with Fuel Rial Not Shown 4251856 Boost Pressure Sensor Not Shown 4251858 Coolant Temperature Sensor Not Shown 4251855 External Air Temperature Sensor Not Shown 4251717...

  • Pagina 192: Fluids And Compounds

    Fluids and Compounds Hydraulic Fluid* 5001405 Two 2-1/2 Gallon Container of ISO VG68 Oil 5001404 One 5 Gallon Pail of ISO VG68 Oil 2500548 Two 2-1/2 Gallon Container of 10W30 Oil 2500546 One 5 Gallon Pail of 10W30 Oil 503409 Two 2-1/2 Gallon Container of ATF Fluid 503407 One 5 Gallon Pail of ATF Fluid...
  • Pagina 193 INDEX 1001752...... 77 1003584 ....133 162716.2 ..... 95 3006639 ....85 1001802...... 51 1003587 ....101 162723 ....47 3006644 ......39 1002679....47 1003590 ....113 163302 ...... 125 3006658 ......89 1002769..55 1003591 ....113 163306 ...... 131 3006663 ......41 1002785......
  • Pagina 194 INDEX 3008459.....113 3010651.......69 340069 ...... 111 363485 ..77 3008461.......67 3010789.......43 340070 ...75 363514 ...... 129 3008471.....137 3010811.......95 363539 ...... 134 3008472.......93 3010812.......95 340074 ....63 363568 ...... 131 3008478.....137 3010825.......95 340075 ....59 363572 ......95 3008521.......37 304569......95 340077 ....89 363574 ......
  • Pagina 195 INDEX ..89 4134530 ..148 4181863 ....37 4231901 ......49 400264... 43 4134532 .... 149 4182386 ....37 4231920 ......37 ..102 4135233 ....102 4182720 ...... 57 4231940 ......47 ..... 131 4135240 ....102 4183634 ...... 75 4233420 ......77 400266..
  • Pagina 196 INDEX 4255270.......69 45201249 5003034 ...... 89 4256361.......39 444730......95 ....... 97 5003091 ...... 47 4256471..125 444758.. 95 452016 ......79 5003157 ...... 79 4256510.......69 444762 79 452018 ....59 5003163 ...... 81 4256511.......69 445245......69 452418 ......69 5003164 ...... 81 4256572.....134 445642......63 453004 ....
  • Pagina 197 INDEX 5003590....142 557650 ...... 142 5003591....142 557844 ......37 5003617...... 43 558004 ...... 145 5003625...... 43 558005 ...... 145 5003627.... 139 558007 ...... 145 5003628....139 558008 ...... 145 5003629....139 558010 ...... 145 5003630....139 558011 ...... 145 5003631....

  • Pagina 200: World Class Quality, Performance And Support

    Jacobsen onderdelen, in een betrouwbare productondersteuning van hoge kwaliteit. When Performance Matters. ™ Ransomes Jacobsen Limited Jacobsen, A Textron Company West Road, Ransomes Europark, Ipswich, IP3 9TT, England 11108 Quality Drive, Charlotte, English Company Registratienr. 1070731 NC 28273, VS www.ransomesjacobsen.com...

Inhoudsopgave