Avoiding Material Damage; Environmental Protection And Saving Energy; Disposing Of Packaging - CONSTRUCTA CD639 Series Gebruikershandleiding En Installatie-Instructies
Verberg thumbnails
Zie ook voor CD639 Series:
- Gebruikershandleiding en installatie-instructies (64 pagina's)
Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
WARNING ‒ Risk of electric shock!
If the appliance or the power cord is dam-
aged, this is dangerous.
▶ Never operate a damaged appliance.
▶ Never pull on the power cord to unplug the
appliance. Always unplug the appliance at
the mains.
▶ If the appliance or the power cord is dam-
aged, immediately unplug the power cord
or switch off the fuse in the fuse box.
▶ Call customer services. → Page 24
Incorrect repairs are dangerous.
▶ Repairs to the appliance should only be
carried out by trained specialist staff.
▶ Only use genuine spare parts when repair-
ing the appliance.
▶ If the power cord of this appliance is dam-
aged, it must be replaced by trained spe-
cialist staff.
2 Avoiding material damage
ATTENTION!
Condensate may cause corrosion damage.
To prevent condensation from building up, switch on
▶
the appliance during cooking.
If moisture gets into the controls, this may result in
damage.
Never clean controls with a wet cloth.
▶
Incorrect cleaning damages the surfaces.
Follow the cleaning instructions.
▶
Do not use harsh or abrasive detergents.
▶
Clean stainless steel surfaces in the direction of the
▶
finish only.
Never clean controls with stainless steel cleaners.
▶
3 Environmental protection and saving energy
3.1 Disposing of packaging
The packaging materials are environmentally compat-
ible and can be recycled.
Sort the individual components by type and dispose
▶
of them separately.
An ingress of moisture can cause an electric
shock.
▶ Before cleaning, pull out the mains plug or
switch off the fuse in the fuse box.
▶ Do not use steam- or high-pressure clean-
ers to clean the appliance.
WARNING ‒ Risk of explosion!
Highly caustic alkaline or highly acidic clean-
ing agents in conjunction with aluminium parts
in the interior of the appliance may cause ex-
plosions.
▶ Never use highly caustic alkaline or highly
acidic cleaning agents. In particular, do not
use commercial or industrial cleaning
agents in conjunction with aluminium parts,
e.g. grease filter on extractor hoods.
Condensation that flows back in may damage the ap-
pliance.
The air extraction duct must be installed with a
▶
gradient of at least 1° from the appliance.
If you put incorrect stress on the design elements, they
may break off.
Do not pull design elements.
▶
Do not place objects on the design elements or
▶
hang objects from them.
There is a risk of surface damage if you do not peel off
the protective film.
Remove the protective film from all parts of the ap-
▶
pliance before using for the first time.
Painted surfaces are easily damaged.
Follow the cleaning instructions.
▶
→ "Cleaning the appliance", Page 21
Ensure that the painted surfaces are not scratched.
▶
3.2 Saving energy
If you follow these instructions, your appliance will use
less power.
Adjust the fan speed to the amount of steam pro-
duced during cooking.
¡ The lower the fan speed, the less energy is con-
sumed.
Only use the intensive mode as required.
If cooking produces large amounts of steam, select a
higher fan speed in good time.
¡ The odours are distributed around the room less.
Switch off the lighting if it is no longer required.
¡ When the lighting is switched off, it does not con-
sume any energy.
Avoiding material damage en
19
Advertenties
Hoofdstukken
Inhoudsopgave
