Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
6.2
System settings
Abbildung 6.2.1: Eingabedialog Authentifi zierung
Date / Time
2
Network
3
The current time and current date of the KHS Mini Control System
-MASTER 2.1- are displayed in the grey boxes. To set the Control System
time, click the
APPLY DATE/TIME
to apply the date and time settings of your PC, for example. The KHS Mini
Control System -MASTER 2.1- can switch automatically between daylight
Control System -MASTER 2.1- can switch automatically between daylight
saving and standard time. If you want this setting, just click the
saving and standard time. If you want this setting, just click the
saving and standard time. If you want this setting, just click the
If the button is showing
If the button is showing
standard time is not automatic.
To establish a connection between the PC and the KHS Mini Control System
-MASTER 2.1- using a web browser, the required network confi gurations can
be entered in the boxes IP address, Subnet, Gateway, prim. DNS and sec. DNS.
Note!
You can obtain the appropriate parameters for integration into
your network from your system administrator
The following parameters are confi gured as factory defaults:
IP-address:
Subnet:
Gateway:
The network settings can only be loaded when the confi guration is loaded
using a USB stick. They are not imported when the confi guration is loaded
using the web server.
© www.kemper-group.com – 10.2023 / K410068602008-00 – 129 /265
Note!
The username "KHS" and password
„0000"is the factory
button. This causes the Control System
the switchover between daylight-saving and
the switchover between daylight-saving and
10.1.23.150
255.255.255.0
10.1.23.254
default.
button.
button.
button.
Advertenties
Hoofdstukken
Inhoudsopgave
