Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
EN
3.1.2.2
Serial number KHS HS2 Hygiene fl ushing box
Serial number of KHS Flush Box PRO on type plate
Main view
When all the devices have been added, they are
displayed in the main view, as shown below.
Device settings
3.1.2.3
In the „Device settings" submenu, the individual
Control System are logically assigned to the
Control type
B valve
A valve
C valve
Safety device
Only measurement
110 /265 – K410068602008-00 / 10.2023 – © www.kemper-group.com
CAN bus setup
Note!
Check to see if the CAN bus icon can always be seen on the
main screen for each connected device and if the LEDs light
up green on all system controls and hygiene fl ushing boxes.
Only then has a proper connection been established.
Description
Terminal fl ushing valve, with several A valves hydraulically preconnected.
Depending on the type of valve, A valves switch the water exchange of a line
or set up the hydraulic balacing in a cold water circulation
Terminal fl ushing valve for one line.
Valve which protects a distribution line.
Slave for the acquisition and long-term monitoring of sensor values.
The individual devices can then be confi gured in
Device settings.
integrated actuators and sensors.
The valve control type is also determined.
Advertenties
Hoofdstukken
Inhoudsopgave
