Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Removing metal grease filter
Fold the filter cover upwards.
1.
Notes
The opening angle of the filter cover is restricted to approx.
■
80°. Do not open the filter cover any further, otherwise the
hinges may be damaged.
The filter cover locks in any position.
■
Remove the two metal grease filters under the filter cover and
2.
the metal grease filter on the underside of the appliance.
Unfasten the lock, fold the metal filter forwards and remove it
from the bracket.
Note: Grease can accumulate at the bottom of the metal
grease filter. Hold the metal grease filter level, otherwise
grease will drip out.
Clean the metal grease filter.
3.
After removing the filters, clean the inside of the appliance.
4.
Clean the filter cover.
5.
Trouble shooting
Malfunctions often have simple explanations. Please read the
following notes before calling the after-sales service.
:
Risk of electric shock!
Incorrect repairs are dangerous. Repairs may only be carried
out and damaged power cables replaced by one of our trained
after-sales technicians. If the appliance is defective, unplug the
appliance from the mains or switch off the circuit breaker in the
fuse box. Contact the after-sales service.
14
Installing the metal mesh grease filter
Insert the two metal grease filters under the filter cover with
1.
the lock facing downwards.
Insert the metal grease filters on the underside of the
appliance.
Fold the metal grease filters inwards, locking them in place.
2.
Close the filter cover.
3.
Changing the activated charcoal filter (only in
circulating-air mode)
In order to guarantee efficient odour filtration, the filter must be
serviced regularly.
The activated charcoal filters must be replaced at least every
4 months.
Notes
The activated charcoal filters are not included in the delivery.
■
The activated charcoal filters can be obtained from specialist
retailers, from our after-sales service or from the Online Shop.
The activated charcoal filters cannot be cleaned or
■
reactivated.
Remove metal grease filter: See above.
1.
Turn the old activated charcoal filter and pull away from the
2.
bracket. ¨
Push the new activated charcoal filter onto the bracket and
3.
turn. ©
Fit the metal grease filter: See above.
4.
Malfunction table
Problem
Possible cause Solution
The appliance
The plug is not
does not work
plugged in.
Power cut
Faulty fuse
The button illu-
The control unit
mination does
is faulty.
not work.
The lighting
The bulbs are
does not work.
faulty.
--------
Connect the appliance to
the electricity supply
Check whether other
kitchen appliances are
working
Check in the fuse box to
make sure that the fuse for
the appliance is OK
Call the aftersales service.
For information on chang-
ing the bulbs, see the
"Replacing Bulbs" section.
Advertenties
Hoofdstukken
Inhoudsopgave
