Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
en Familiarising yourself with your appliance
5 Familiarising yourself with your appliance
5.1 Control panel
You can use the control panel to configure all functions of your appliance and to obtain information about the operat-
ing status.
Switching the appliance on or off
Switching the fan run-on on or off
Switching the intermittent ventilation on or off
Decreasing the fan setting
6 Before using for the first time
Configure the settings for initial start-up. Clean the ap-
pliance and accessories.
7 Basic operation
7.1 Switching on the appliance
Press
.
▶
a The appliance starts at fan setting 2.
7.2 Switching off the appliance
Press
.
▶
7.3 Selecting a fan setting
Press
or .
▶
7.4 Switching on intensive mode
If particularly strong odours or vapours develop, you
can use intensive mode.
To switch on intensive mode 2, press .
1.
appears on the display.
a
To switch on intensive mode 1, press
2.
appears on the display.
a
a After approx. 6 minutes, the appliance automatically
switches to fan setting 3.
7.5 Switching off intensive mode
Press .
▶
20
7.6 Switching on the fan run-on
During the fan run-on, the appliance continues to run
for a short time and then switches off automatically.
Press
▶
a The fan run-on starts at fan setting 1.
a The appliance switches off automatically after ap-
prox. 10 minutes.
7.7 Switching off the fan run-on
Press
▶
7.8 Switching on intermittent ventilation
With intermittent ventilation, the appliance switches the
ventilation on and off at regular intervals.
Press
▶
a The appliance runs for 5 minutes per hour at fan
again.
setting 1.
7.9 Resetting the saturation indicator
After cleaning the grease filter or after changing the
odour filter, the saturation indicator can be reset.
Note: The saturation indicator does not apply for non-
regenerative odour filters that are inserted downstream
of the grease filters. These odour filters must be re-
placed twice a year.
Increasing the fan setting
Switching intensive modes on or off
Resetting the filter saturation indicator
Switching the lighting on or off
Setting the brightness
.
Advertenties
Hoofdstukken
Inhoudsopgave
