Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
11.1
P10 Delete stored
data
Fig. 17: Setup - Delete all records, Dis-
play 1
Fig. 18: Setup - Delete all records, Dis-
play 2
11.2
P20 Setting the
CO Alarm
Threshold
Fig. 19: Setup - Setting the CO Alarm
Threshold
When the setup mode is activated, P10 and "CLr"
will appear first.
Press M/AVG to delete all stored data. "yes"
or "no" will appear on screen, see Abb. 18
Press HOLD/▲or MEM/▼ to choose NO (do
not delete) and YES (delete).
Press M/AVG to confirm.
Press START/ESC to escape and return to
P10.
When the setup mode is activated, press HOLD.
P20 and "AlAr" will appear.
Press M/AVG to go into P21 for setting the CO
alarm threshold.
The current set value will be blinking.
Press HOLD/▲ to increase the value or
MEM/▼ to decrease. Each press tunes 5
ppm.
Press M/AVG to save the settings or press
START/ESC to return to the P20 mode with-
out saving.
Settings
EN
53
Advertenties
Hoofdstukken
Inhoudsopgave
