Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Settings
11
Settings
When the meter is off, hold down the ON/OFF key for more than 1 second to enter
the setup mode.
Press HOLD to switch from one setup mode to the next one (from P10 to P20 etc.).
Press the M/AVG key to go to the parameter that you want to change. Press
HOLD/▲ or M▼ to select.
In P10 to P60 mode press START/ESC to escape and enter the measuring mode.
In the different modes of the Wöhler KM 410, different parameters can be set.
Mode
Parameter
P10
delete stored data
P20
enter the CO alarm threshold
P30
select the temperature unit
P40
set the sampling rate of data logging
P 50
enter the air pressure
P60
select the time format as 12 hours or 24 hours
date and time
52
Advertenties
Hoofdstukken
Inhoudsopgave
