Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
INSTALLATION/CONNECTION
Wiring connection
Antenna terminal
Connecting the ISO connectors on some
VW/Audi or Opel (Vauxhall) automobiles
You may need to modify the wiring of the supplied
wiring harness as illustrated below.
A7 (Red)
Vehicle
A4 (Yellow)
Default wiring
If your car does not have an ISO terminal
We recommend installing the unit with a commercially
available custom wiring harness specific for your car and
leave this job to professionals for your safety. Consult your
car audio dealer.
Rear/subwoofer output
Yellow (Battery wire)
Red (Ignition wire)
Ignition wire
(Red)
Unit
Red (A7)
Battery wire
(Yellow)
Yellow (A4)
ISO connectors
Fuse (10 A)
Light blue/yellow
To the steering wheel remote control adapter
(Steering remote
control wire)
Pin
A4 Yellow
A5 Blue/White
A6 Orange/white
A7 Red
A8 Black
B1 Purple ]
B2 Purple/black [
B3 Gray ]
B4 Gray/black [
B5 White ]
B6 White/black [
B7 Green ]
B8 Green/black [
* You can also connect a subwoofer speaker directly without an external subwoofer
amplifier. For setting, see page 12.
When connecting to an external amplifier, connect
its ground wire to the car's chassis to avoid
damaging the unit.
Color and function
: Battery
: Power control (12 V
350 mA)
: Car light control switch
: Ignition (ACC)
: Earth (ground) connection
: Rear speaker (right)
: Front speaker (right)
: Front speaker (left)
: Rear speaker (left)*
ENGLISH
19
Advertenties
Hoofdstukken
Inhoudsopgave
