Inhoudsopgave
Advertenties
Pour les modè les G31, G41 et G61, veuillez prê ter
attention aux remarques suivantes lorsque l'appareil
fonctionne en 5 GHz :
(i)Les dispositifs fonctionnant dans la bande
5150-5250 MHz sont ré servé s uniquement pour une
utilisation à l'inté rieur afin de ré duire les risques de
brouillage pré judiciable aux systè mes de satellites
mobiles utilisant les mê mes canaux.
(ii) Le gain d'antenne maximal autorisé pour les
appareils dans les bandes 5250-5350 MHz et
5470-5725 MHz doivent respecter le pire limiter; et
(iii) Le gain d'antenne maximal autorisé pour les
appareils dans la bande 5725-5875 MHz doivent
respecter le pire limites spé cifié es pour le
point-à -point et l'exploitation non point à point, le
cas é ché ant.
Safety Instruction
These instructions are intended to ensure that user
can use the product correctly to avoid danger or
property loss.
Laws and Regulations
● Use of the product must be in strict compliance
with the local electrical safety regulations.
Transportation
● Keep the device in original or similar packaging
while transporting it.
● Keep all wrappers after unpacking them for future
use. In case of any failure occurred, you need to
return the device to the factory with the original
wrapper. Transportation without the original
wrapper may result in damage on the device and
the company shall not take any responsibilities.
● Do not drop the product or subject it to physical
shock. Keep the device away from magnetic
interference.
Power Supply
● The input voltage should meet the Limited Power
Source (5 VDC, 940 mA ) according to the
IEC61010-1 standard. Please refer to technical
specifications for detailed information.
● Make sure the plug is properly connected to the
power socket.
● DO NOT connect multiple devices to one power
adapter, to avoid over-heating or fire hazards
caused by overload.
Battery
● The built-in battery cannot be dismantled. Please
contact the manufacture for repair if necessary.
● DO NOT charge other battery types with the
supplied charger. Confirm there is no flammable
material within 2 m of the charger during
charging.
● For long-term storage of the battery, make sure it
is fully charged every half year to ensure the
battery quality. Otherwise, damage may occur.
● DO NOT place the battery near heating or fire
source. Avoid direct sunlight.
● DO NOT swallow the battery to avoid chemical
burns.
● DO NOT place the battery in the reach of children.
● When the device is powered off and the RTC
battery is full, the time settings can be kept
for 15 days.
● In the first use, power on the device and charge
the RTC battery with the lithium battery for more
than 10 hours.
● The battery voltage is 3.6 V, and the battery
capacity is 6700 mAh.
● The battery is certified by UL2054.
● CAUTION: Risk of explosion if the battery is
replaced by an incorrect type.
Maintenance
● If the product does not work properly, please
contact your dealer or the nearest service center.
We shall not assume any responsibility for
problems caused by unauthorized repair or
maintenance.
● Wipe the device gently with a clean cloth and a
small quantity of ethanol, if necessary.
● If the equipment is used in a manner not specified
by the manufacturer, the protection provided by
the device may be impaired.
● Please contact the local dealer for the information
on maintenance points. For more detailed
calibration services, please refer to
https://www.hikmicrotech.com/en/support/
● Please notice that the current limit of USB 3.0
PowerShare port may vary with the PC brand,
which is likely to result in incompatibility issue.
Therefore it's advised to use regular USB 3.0 or
USB 2.0 port if the USB device fails to be
recognized by PC via USB 3.0 PowerShare port.
● Your camera will periodically perform a
self-calibration to optimize image quality and
measurement accuracy. In this process the image
will pause briefly and you'll hear a "click" as a
shutter moves in front of the detector. The
self-calibration will be more frequent during start
up or in very cold or hot environments. This is a
normal part of operation to ensure optimum
performance for your camera.
Using Environment
● DO NOT expose the device to extremely hot, cold,
dusty, corrosive, saline-alkali, or damp
environments. Make sure the running environment
meets the requirement of the device. The
operating temperature shall be -20 ° C to 50 ° C
(-4 ° F to 122 ° F), and the operating humidity shall
be 90% or less.
● Place the device in a dry and well-ventilated
environment.
● DO NOT expose the device to high
electromagnetic radiation or dusty environments.
● DO NOT aim the lens at the sun or any other bright
light.
● When any laser equipment is in use, make sure
that the device lens is not exposed to the laser
beam, or it may burn out.
● The device is suitable for indoor and outdoor uses,
but do not expose it in wet conditions.
● The level of protection is IP 54.
Technical Support
● The https://www.hikmicrotech.com portal will
help access to our support team, software and
documentation, service contacts, etc.
Emergency
● If smoke, odor, or noise arises from the device,
immediately turn off the power, unplug the power
cable, and contact the service center.
Laser
● Warning: The laser radiation emitted from the
device can cause eye injuries, burning of skin or
inflammable substances. Prevent eyes from direct
laser. Before enabling the Light Supplement
function, make sure no human or inflammable
substances are in front of the laser lens. The wave
length is 650 nm, and the power is less than 1 mW.
The laser meets the IEC60825-1:2014, EN
60825-1:2014+A11:2021, and EN 50689:2021
standard.
6
Advertenties
Inhoudsopgave
