Inhoudsopgave
Advertenties
en Cleaning and servicing
▶
Do not put descaling tablets or
other products in the ground cof-
fee compartment.
Notes
The display indicates the progress
¡
of the descaling or cleaning pro-
cess.
If your appliance is not descaled in
¡
good time, the display will show
the following message: "Descaling
overdue. Appliance is locked.
Please press menu for 3 sec.".
If your appliance has been locked,
¡
you can only operate it again once
the descaling process has been
carried out.
If you accidentally interrupt the ser-
¡
vice programme, you must reset it.
→ "Resetting service programmes",
Page 68
Tips
If you use a water filter, this will
¡
prolong the time until you have to
run a service programme.
You can combine "Descale" and
¡
"Clean" using the "calc'nClean"
service programme.
Clean your appliance with a soft,
¡
damp cloth immediately after a
service programme to remove any
descaling solution residues and
prevent corrosion.
Using the service programmes
Notes
If you are using the service pro-
¡
gramme "Rinse milk system",
clean and connect the milk con-
tainer.
If you are using the service pro-
¡
gramme "Cleaning and care",
clean the brewing unit beforehand.
→ "Cleaning the brewing unit",
Page 67
68
If you are using the service pro-
¡
grammes "Descale" or
"calc'nClean", first clean the brew-
ing unit and prepare the descaling
solution.
Press
.
1.
Use
and
2.
and care" and press
Use
and
3.
quired programme and press
e.g. "Descale".
The display will guide you through
a
the programme.
Preparing descaling solution
Fill a container with 0.5 l lukewarm
1.
water.
Add a descaling tablet to the water
2.
and stir until it is fully dissolved.
Resetting service programmes
Perform the following steps if a ser-
vice programme is interrupted, e.g.
due to a power failure.
Rinse out the water tank.
1.
Fill the water tank with fresh, non-
2.
carbonated water up to the "max"
marking.
Press
.
3.
The appliance will rinse itself for
a
approx. 2 minutes.
Empty and clean the drip tray.
4.
Insert the drip tray and close the
5.
door.
Restart the service programme.
6.
to select "Cleaning
.
to select the re-
,
Advertenties
Hoofdstukken
Inhoudsopgave
