Inhoudsopgave
Advertenties
en Before using for the first time
Remove the milk container on the
7.
left of the appliance.
Place a container with a capacity
8.
of 1 litre under the outlet system
and press
The filter will be rinsed and the fol-
a
lowing message displayed: "Rins-
ing complete.".
The appliance is ready to use.
a
Tips
You should also change your wa-
¡
ter filter for reasons of hygiene.
With a water filter you need to de-
¡
scale your appliance less fre-
quently.
If your appliance has not been
¡
used for a long time, for example if
you were on holiday, you should
rinse the water filter before use by
dispensing a cup of hot water.
The water filter can be purchased
¡
from retailers or customer service.
→ "Accessories", Page 51
7.5 Performing initial start-up
After connecting the appliance to the
power supply, configure the settings
for first use. First use appears when
switching on for the first time or after
resetting to the factory settings.
Press
to switch on the appli-
1.
ance.
The display will show the language
a
that is preset.
Press
or
2.
shows the desired language.
Press
.
3.
Determine the water hardness.
4.
Press
.
5.
To set the water hardness, press
6.
or
.
Press
.
7.
Clean and fill the water tank.
8.
1
Depending on the appliance specifications
54
.
until the display
Press
.
9.
For more information scan the QR
10.
1
code
.
To now insert a water filter now,
11.
press
.
To insert a water filter later on,
12.
press
.
Fill the bean container.
13.
Press
.
14.
Press
.
15.
The appliance is rinsing and is
a
ready to use.
Tip: You can change the settings at
any time.
→ "Overview of the basic settings",
Page 63
7.6 General information
Please bear this information in mind
so that you can get the best out of
your appliance.
Notes
The appliance has been pro-
¡
grammed at the factory with stand-
ard settings for optimum operation.
The grinder has been factory-set
¡
for optimum operation. If coffee is
only dispensed drop by drop or is
too thin and with too little crema,
you can adjust the grinding level
when the grinder is running.
→ "Adjusting the grinding level",
Page 59
During operation water droplets
¡
may form at the ventilation slits
and on the lid of the tablet com-
partment.
If you do not perform any actions
¡
on the appliance for a certain
period, it will switch off automatic-
ally. You can change the duration
in the basic settings. → Page 62
Advertenties
Hoofdstukken
Inhoudsopgave
