en Basic operation
After preparing the beverage, the
a
milk system will automatically
clean itself with a short jet of
steam.
Tip: If you want to stop the dispens-
ing process early, press
want to stop the dispensing process
altogether, press
8.8 Dispensing special drinks
Your appliance has other drinks be-
sides the ones that you can obtain
via the quick-selection buttons.
▶
Press
several times.
→ "Drinks overview", Page 51
8.9 Dispensing milk froth
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
▶
Never touch the milk system when
it is hot.
▶
Allow the hot milk system to cool
down before touching it.
Requirements
The milk container has been con-
¡
nected.
The milk container has been filled
¡
with sufficient milk.
Place your pre-warmed cup under
1.
the outlet system.
Press
repeatedly until the dis-
2.
play shows "Milk froth".
Change the setting if necessary:
3.
To adjust the per-cup quantity,
‒
press
.
→ "Adjusting the amount",
Page 59
Press
.
4.
The milk froth will run out of the
a
outlet system.
58
. If you
.
To stop dispensing prematurely,
5.
press
.
8.10 Dispensing hot water
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
▶
Never touch the milk system when
it is hot.
▶
Allow the hot milk system to cool
down before touching it.
Note: If the milk system has not been
cleaned, small amounts of milk may
be dispensed with the water.
Requirement: The milk system has
been cleaned. .
Place your pre-warmed cup under
1.
the outlet system.
Press
repeatedly until the dis-
2.
play shows "Hot water".
Change the setting if necessary:
3.
To adjust the per-cup quantity,
‒
press
.
→ "Adjusting the amount",
Page 59
Press
.
4.
Hot water will run out of the outlet
a
system.
To stop dispensing prematurely,
5.
press
.
8.11 Drink settings
Prepare a drink according to your
taste.
Adjusting the coffee strength
Press the symbol for your desired
1.
drink.
To select the strength of the cof-
2.
fee, press .
You can select the following coffee
strengths: