Download Inhoudsopgave Inhoud Print deze pagina

Dispensing A Coffee Drink Made From Ground Coffee; Dispensing Drinks With Milk Froth - Siemens EQ500 integral connect TQ51 Series Gebruikershandleiding

Inhoudsopgave

Advertenties

en Basic operation
Press the drinks symbol for a cof-
2.
fee drink without milk.
The display will show the drink and
a
your current settings.
→ "Drink settings", Page 58
Change the settings where neces-
3.
sary:
To adjust the per-cup quantity,
press
.
→ "Adjusting the amount",
Page 59
To adjust the coffee strength,
press .
→ "Adjusting the coffee
strength", Page 58
Press
⁠ .
4.
The coffee beans are freshly
ground for each brewing process.
The coffee is brewed and then dis-
a
pensed into the cup.
Tips
You can press
¡
pensing process prematurely.
Find out how to make coffee
¡
drinks with milk.
→ "Dispensing drinks with milk
froth", Page 56
8.4 Dispensing a coffee drink
made from ground coffee
ATTENTION!
The ground coffee compartment can
become blocked.
Do not use coffee beans.
Do not use instant coffee.
Use a soft brush to gently direct
the ground coffee residue into the
shaft.
Note
When using ground coffee, the
following selections are not available:
Two cups at once
¡
Coffee strength
¡
"doubleshot"
¡
56
to stop the dis-
Place your pre-warmed cup under
1.
the outlet system.
Press the symbol for your desired
2.
drink.
Press
repeatedly until the display
3.
shows "Gr. coffee".
Open the ground coffee compart-
4.
ment.
Add a maximum of 2 level tea-
5.
spoons of ground coffee, max.
12 g.
Close the ground coffee compart-
6.
ment.
Press
⁠ .
7.
The coffee is brewed and then dis-
a
pensed into the cup.
Tips
You can press
¡
pensing process prematurely.
If you would like another drink with
¡
ground coffee, repeat the process.
Always add the ground coffee just
¡
before making the drink.
8.5 Dispensing drinks with
milk froth
You can use your appliance to dis-
pense coffee drinks with milk froth.
WARNING
Risk of burns!
The milk system can become ex-
tremely hot.
Never touch the milk system when
it is hot.
Allow the hot milk system to cool
down before touching it.
ATTENTION!
Milk residues can dry on surfaces
and are difficult to remove.
Clean the milk system after every
use.
to stop the dis-

Advertenties

Inhoudsopgave
loading

Inhoudsopgave