Inhoudsopgave
Advertenties
For technical reasons steam can
¡
escape from the appliance.
The first beverage will not yet have
¡
its full aroma if:
– You are using the appliance for
the first time.
– You have run a service pro-
gramme.
– You have not used the appli-
ance for a long time.
Do not drink the beverage.
Tip: You will get a stable, fine-pored
crema after you have started up your
appliance and dispensed a few cups.
8 Basic operation
Basic operation
Basic operation
8.1 Switching the appliance
on or off
Switch the appliance on or off with
▶
.
When the appliance switches on,
the display shows the Siemens
logo. When the appliance is
switched on or off, it will rinse itself
automatically. When switched off,
the appliance will emit steam into
the tray for cleaning. During the
rinsing process, the display shows
a drop. If the appliance is still
warm when switched on, or if no
drink was dispensed before it was
switched off, the appliance doesn't
rinse itself.
8.2 Dispensing drinks
Find out how to prepare a drink of
your choice.
WARNING
Risk of scalding!
Freshly prepared drinks are very hot.
▶
Leave drinks to cool down if ne-
cessary.
▶
Do not let escaping liquids or
steam come into contact with your
skin.
Tips
You can directly select the drink
¡
you want using the quick-selection
buttons. The display shows you the
drink and the current settings.
Your appliance has other drinks
¡
besides the ones that you can ob-
tain via the quick-selection buttons.
→ "Dispensing special drinks",
Page 58
You can adapt your drink to your
¡
personal taste.
→ "Drink settings", Page 58
Notes
If you do not change any settings
¡
for approx. 5 seconds, the appli-
ance will exit settings mode. The
settings will be automatically
saved.
With a number of settings your cof-
¡
fee is prepared in several steps.
Wait until the process is fully com-
pleted.
8.3 Dispensing a coffee drink
made from fresh beans
Place your pre-warmed cup under
1.
the outlet system.
Basic operation en
55
Advertenties
Hoofdstukken
Inhoudsopgave
