Inhoudsopgave
Advertenties
If the water hardness exceeds
¡
21 °dH (3.8 mmol/l), you can fill
the water tank with prefiltered wa-
ter to reduce limescale deposits.
7.3 Overview of water hardness levels
The table shows allocation of the levels to the different degrees of water hard-
ness.
Setting
1
2
3
1
4
1
Factory setting
7.4 Water filter
You can use a water filter to minimise
limescale deposits and reduce impur-
ities in the water.
The limescale content of the water in-
fluences the aroma and crema of cof-
fee. There is an aroma ring on the
underside of the BRITA INTENZA wa-
ter filter. Turn the aroma ring to set
the optimum aroma level for your
mains water.
Inserting and activating the water
filter
ATTENTION!
Possible damage to the appliance
due to limescale build-up.
▶
Change the water filter in good
time.
▶
Change the water filter after
2 months at the latest.
▶
Observe the display messages.
1
Depending on the appliance specifications
Ring setting on
INTENZA filter
A
A
B
C
1
Before using for the first time en
German degrees
in °dH
1 - 7
8 - 14
15 - 21
22 - 30
Note: If "Please replace or deactivate
water filter in menu." is shown on the
display, replace the water filter.
If you are not inserting a new filter,
select "No filter" and follow the in-
structions on the display.
Immerse the water filter in a glass
1.
of water and press the sides to-
gether lightly until no more air
bubbles rise to the surface.
→ Fig.
8
Press
.
2.
Press
or
3.
.
Use
or
4.
or "Replace water filter" and press
.
Note: If you are not inserting a new
5.
filter, select "No filter" in the menu
settings.
Press the water filter firmly into the
water tank.
Fill the water tank up to the "max"
6.
mark and press
Total hardness in
mmol/l
< 1.3
1.3 - 2.5
2.5 - 3.8
> 3.8
"Water filter" and
to select "New filter"
.
53
Advertenties
Hoofdstukken
Inhoudsopgave
