Inhoudsopgave
Advertenties
19. Reels
The JMB-M greenkiller will be standard equipped with 2 high pressure reels of 25 meter.
There's also a possibility to work with 1 high pressure reel and 1 low pressure reel.
Always secure/block the reel(s) after use and before transporting the trailer.
Please note for possible risk of heat to the protective cap of the reel coupling(s) at the use of the burner.
Always unroll the reel hose(s) completely during spraying activities to ensure an optimal performance!
Disconnect the low pressure coupling: loosen ring to the left, disconnect the coupling, tighten the ring back to the
right for the water connection.
Connect the low pressure coupling again: Loosen ring (left), lock the coupling, tighten the ring to the right.
Disconnect the high pressure coupling(s): loosen the plastic coupling(s) to the right.
Fix the lance on the high pressure gun. Lock back the coupling(s) by turning to the left.
Low/high pressure coupling
High pressure coupling
20. Support arm
The support arm is mounted at the back, underneath the trailer on the light bar.
Watch out for the crossover point of the support arm at a filled/unfilled water tank.
Pulling out the support arm can be done by the red handle, the support arm folds now, set the support arm fixed
to the ground by the central bolt (circled in red on photo 3) and with aid of a wheel bolt/crank.
Pull back the red handle and push the support arm upwards to return to fold.
Pay also attention to compensation of the spring on the axles.
If the supports are lowered completely, they will take the entire weight of the load and can become damaged.
On soft ground, suitable sheet/plate material has to be laid under the supports.
21. Pressure valve
The pressure control valve has a fixed default setting, this is not adjustable.
JMB-M greenkiller: REV B
DiBO n.v. 90
Advertenties
Inhoudsopgave
