Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Personal protective equipment
Never work without suited protective equipment:
Do not wear loose-fitting clothes or jewellery; they could
be caught by movable parts.
Wear a hair-net if your hair is long
Certificated hardhat in situations where injuries to the
head must be expected (e.g. when chopping or releasing
trees).
Visor
Ear protection
Protective jacket with striking colour
Cut-proof trousers and gloves
When using the brush cutter, slip-resistant boots
(safety boots) with cut protection and protective toe caps
as well as gloves with cut protection must be used.
Slip-resistant shoes are permitted when used as grass
trimmer.
Fire extinguisher and spade (sparks may occur during
working)
First-aid material
Mobile telephone if required
Safety instructions
Carry out the following checks before the initiation and
regularly during the working process. Observe the relevant
sections in the operating instruction manual:
Is the device assembled completely and properly?
Is the device in good and safe condition?
Are the handles clean and dry?
Check to make sure the cutting unit stops while the motor is
idling.
Check the machine for loose fasteners, fuel leakage and
damaged parts such as cracks in the tool.
Before starting your work make sure that:
no other persons, children or animals stay within the
working area,
you can always step back without any barriers,
your standing area is free from foreign objects,
brushwood and branches,
you always have a secure standing position.
Is the workplace free of risks to stumble? Keep your
workplace in an orderly condition! Untidiness can result in
accidents. Risk of stumbling.
Before trimming, remove all foreign objects (e.g. stones,
branches, wires, etc.). While working watch out for further
foreign objects.
Take into consideration environmental influences:
Do not work under insufficient light conditions (e.g. fog,
rain, snow flurry or twilight). If you can no longer see
details within the falling area
Do not use the device near inflammable liquids or gases
- Risk of fire.
The operator is responsible for accidents or risks which
occur to other persons or their properties.
–
before working
risk of accident.
–
Safety instructions
Never saw with only one hand. Hold the device always
firmly with both hands.
Never work
with stretched arms
on hardly accessible places above shoulder height
standing on a ladder, a staging or a tree.
Always work on non-skid and flat ground.
Avoid abnormal posture. Provide a safe standing position
and keep at any time the balance.
Always use the carrying strep supplied.
Change your working posture from time to time.
Observe sufficient break times to rest.
To have a break stop the machine and place it so that
nobody is at risk. Secure the device against unauthorized
access.
Safety instruction
Never work alone. Keep acoustic and visual contact to other
persons at all times to allow immediate first aid in emergency
cases.
Risk to third parties! Keep children, bystanders and animals
away from your working area. Make sure that a distance of at
least 15 m to the machine is observed during operation.
Immediately stop the engine at imminent danger or in
emergency cases
Never leave the device running unattended.
This petrol grass trimmer produces harmful
substances! Never run the device in closed or
poorly ventilated rooms. Provide for a sufficient
change of air when working in wells, trenches or
confined spaces. There is the risk of carbon monoxide
poisoning or death by suffocation.
Immediately stop working when you feel unwell (e.g.
headache, dizziness, nausea, etc.). Otherwise there is an
increased risk of accidents.
Make sure that the cutting tool is free before starting the
engine.
Before starting the engine, make sure that your hands and
feet are kept at a safe distance to the cutting tool.
Caution! The cutting tool may after-run. Do not try to slow it
down by hand.
Start cutting only when the cutting tool has reached the full
rotational speed.
Do not overload the machine! You work better and safer in
the given performance range.
Take breaks when working so that the engine can cool down.
Do not place a hot machine in dry grass or onto inflammable
objects.
Never touch the silencer and the engine while the machine is
running or shortly after it was stopped. Danger of burning!
Never bring the cutting tool in contact with rigid objects
(stones, trunks).
–
operation
–
while working
21
Advertenties
Hoofdstukken
Inhoudsopgave
