Inhoudsopgave
Advertenties
Special installation conditions
Length of pressure hose >10 m
Laying of the pressure hose with a constantly rising gradient is not possible
Condensate formation in the pressure hose
Connect the pressure hose in accordance with the enclosed installation instructions.
4.7
Fitting the drive motor of the backwater flap (s) (option)
One or two drive motors are included in the scope of deliv-
ery, depending on the version.
Cable marking
grey
black
Fix the drive motor (2) on the backwater flap and optionally
on the redundant valve as follows:
If the position has not already been selected, move the
emergency closure lever (4) into the "CLOSED" position
(as shown).
Remove the protective cap (3).
Fix the drive motor (2) using 4 screws (1).
In the case of systems with small chamber depth (cone
ring directly above the system tank), the entire backwater
flap assembly (quick-release closures) must be removed
so that the drive motor can be installed.
4.8
Installing the control unit
Install the control unit in accordance with the instructions enclosed with the unit.
Safely lay all cables of the electrical components.
TeleControl GSM modem
Mount the TeleControl modem (art. no. 28792) as described in the corresponding installation instructions 434-033.
4.8.1
Fixing / connecting the redundant valve control unit (option)
010-694
Function
Backwater flap
Redundant valve
Backwater lifting station / Installation and operating instructions
35 / 136
Advertenties
Hoofdstukken
Inhoudsopgave
