Gaggenau RB282 Gebruiksaanwijzing pagina 37
Verberg thumbnails
Zie ook voor RB282:
- Gebruiksaanwijzing (76 pagina's) ,
- Gebruikershandleiding (116 pagina's) ,
- Gebruikershandleiding (140 pagina's)
Inhoudsopgave
Advertenties
6
Connect the mobile device with the WLAN network
HomeConnect.
Password: HomeConnect
It can take up to 60 seconds to establish the
connection.
7
After successfully connecting, open the Home
Connect app on the mobile device.
The app will search for the refrigerator.
8
As soon as the refrigerator has been found, enter
the network name (SSID) and the password (Key) of
your own home network (WLAN) into the
corresponding fields.
9
Confirm with the button Transmit to domestic
appliances.
– If the connection is successful, On flashes up in
the freezer compartment temperature display.
You can now connect the refrigerator with the
app.
– If the freezer compartment temperature display
shows OF, no connection could be established.
Check whether the refrigerator is located within
the range of the home network (WLAN).
Repeat the process.
Connecting the refrigerator to the
Home Connect app
·
1
Press
button.
The refrigerator compartment temperature display
shows Cn.
2
Keep pressing –/+ button refrigerator compartment
until the refrigerator compartment temperature
display shows PA and the freezer compartment
temperature display shows OF.
3
Press –/+ button freezer compartment to connect
the appliance to the app.
The freezer compartment temperature display
shows an animation.
As soon as the refrigerator and the app are
connected, the freezer compartment temperature
display shows On.
4
Open the app and wait until the refrigerator is
displayed.
Use Add to confirm the connection between the
app and the refrigerator.
If the refrigerator is not automatically displayed,
click on Add appliance in the app and follow the
instructions. As soon as your refrigerator is
displayed, add it with +.
5
Follow the instructions in the app until the process
is complete.
The refrigerator compartment temperature display
shows PA and the freezer compartment temperature
display shows On.
The refrigerator has been connected to the app.
If the connection fails, check whether the mobile
device is connected to the home network (WLAN).
Then try to establish the connection again.
If Er appears in the freezer compartment
temperature display, reset the Home Connect
settings.
Note: On resetting, all Home Connect settings are
reset.
Verify signal strength
You should verify the signal strength if no connection
can be established.
·
1
Press the
button.
The refrigerator compartment temperature display
shows Cn.
2
Press button –/+ refrigerator compartment until the
refrigerator compartment temperature display
shows SI. In the freezer compartment temperature
display a value appears between 0 (no signal) and 3
(full signal).
The signal strength should be at least 2. If the
signal strength is too weak, the connection may be
interrupted.
– Place the router and refrigerator closer together.
– Ensure that the connection is not interfered with
by screening walls.
– Alternatively, install a repeater to make the
signal stronger.
Resetting Home Connect settings
If there is a problem when trying to establish a
connection or if you would like to register the appliance
in a different home network (WLAN), the Home Connect
settings can be reset:
·
1
Press the
button.
The refrigerator compartment temperature display
shows Cn.
2
Press button –/+ refrigerator compartment until the
refrigerator compartment temperature display
shows rE and the freezer compartment temperature
display shows OF.
3
Press button –/+ freezer compartment.
Freezer compartment temperature display shows an
animation for 15 seconds.
Then the freezer compartment temperature display
shows OF.
The Home Connect settings have been reset.
Home Connect
en
37
Advertenties
Hoofdstukken
Inhoudsopgave
