Advertenties
▶ Do not store batteries on the charger. Always remove the battery from the charger
when the charging operation has completed.
▶ Never leave batteries in direct sunlight, on sources of heat, or behind glass.
▶ Store the product and batteries where they cannot be accessed by children or
unauthorized persons.
▶ Prior to each use and before and after prolonged storage, check the product and the
batteries for damage.
9
Troubleshooting
If a problem occurs, always observe the status indicator of the battery. See the section
headed Status indicators of the Liion battery.
If the trouble you are experiencing is not listed in this table or you are unable to rectify
the problem by yourself, contact Hilti Service.
Trouble or fault
Product does not de-
velop full power.
The product can't be
switched on.
Product does not start.
LEDs of the battery
show nothing
10
Disposal
WARNING
Risk of injury due to incorrect disposal! Health hazards due to escaping gases or liquids.
▶ DO NOT send batteries through the mail!
▶ Cover the terminals with a non-conductive material (such as electrical tape) to prevent
short circuiting.
▶ Dispose of your battery out of the reach of children.
▶ Dispose of the battery at your Hilti Store, or consult your local governmental garbage
disposal or public health and safety resources for disposal instructions.
Most of the materials from which Hilti products are manufactured can be recycled. The
materials must be correctly separated before they can be recycled. In many countries,
your old tools, machines or appliances can be returned to Hilti for recycling. Ask Hilti
Service or your Hilti sales representative for further information.
▶ Do not dispose of power tools, electronic equipment or batteries as household
waste!
11
Manufacturer's warranty
▶ Please contact your local Hilti representative if you have questions about the warranty
conditions.
34
English
Possible cause
The control switch is not
fully pressed.
Switch-on interlock not acti-
vated.
Bandsaw blade jams
Battery defective
Action to be taken
▶ Press the control switch
fully.
▶ Activate the switch-on
interlock.
▶ Check whether the band-
saw blade is fitted cor-
rectly and/or damaged.
▶ Contact Hilti Service.
2354065
*2354065*
Advertenties
