Advertenties
estimation of exposure should also take into account the times when the tool is switched
off, or when it is running but not actually being used for a job. This can significantly reduce
exposure over the total working period. Identify additional safety measures to protect the
operator from the effects of noise and/or vibration, for example: Maintaining the power
tool and accessory tools, keeping the hands warm, organization of work patterns.
Noise information
Sound power level (L
Uncertainty for the sound power level (K
Sound pressure level (L
Uncertainty for the sound pressure level (K
Total vibration
Vibration emission value for cutting in metal
(ah,CM)
Uncertainty (K)
5
Preparations at the workplace
WARNING
Risk of injury by inadvertent starting!
▶ Before inserting the battery, make sure that the product is switched off.
▶ Remove the battery before making any adjustments to the power tool or before
changing accessories.
Observe the safety instructions and warnings in this documentation and on the product.
5.1
Charging the battery
1. Before charging the battery, read the operating instructions for the charger.
2. Make sure that the contacts on the battery and the contacts on the charger are clean
and dry.
3. Use an approved charger to charge the battery. → page 25
5.2
Inserting the battery
WARNING
Risk of injury by short circuit or falling battery!
▶ Before inserting the battery, make sure that the contacts on the battery and the
contacts on the product are free of foreign matter.
▶ Make sure that the battery always engages correctly.
1. Charge the battery fully before using it for the first time.
2. Push the battery into the product until it engages with an audible click.
3. Check that the battery is seated securely.
5.3
Removing the battery
1. Press the battery release button.
2. Remove the battery from the product.
28
English
)
WA
)
pA
)
WA
)
pA
B 2255
B 22255
2354065
*2354065*
86 dB(A)
3 dB(A)
75 dB(A)
3 dB(A)
0.8 m/s²
0.7 m/s²
1.5 m/s²
Advertenties
