Download Print deze pagina

Hilti NURON SB 6-22 Originele Handleiding pagina 33

Advertenties

3.4.2 Indicators showing the battery's state of health
To check the battery's state of health, press the release button and hold it down for longer
than three seconds. The system does not detect a potential malfunction of the battery
due to misuse, for example battery dropped or pierced, external heat damage, etc.
Status
All LEDs show in sequence, followed by
one (1) LED showing constantly green.
All LEDs show in sequence, followed by
one (1) LED quick-flashing yellow.
All LEDs show in sequence, followed by
one (1) LED showing constantly red.
4
Technical data
Weight in accordance with EPTA Procedure 01, with-
out battery
Rated voltage
No-load speed
Max. cutting depth
Dimensions, product (Length x width x height)
Dimensions of bandsaw blade (Length x width x thick-
ness)
Ambient temperature for operation
Storage temperature
4.1
Battery
Battery operating voltage
Weight, battery
Ambient temperature for operation
Storage temperature
Battery charging starting temperature
4.2
Noise information and vibration values in accordance with EN 60745
The sound pressure and vibration values given in these instructions were measured in
accordance with a standardized test and can be used to compare one power tool with
another. They can also be used for a preliminary assessment of exposure. The data given
represents the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can
vary. This can significantly increase exposure over the total working period. An accurate
*2354065*
Meaning
The battery can remain in use.
The check to ascertain the battery's state
of health did not complete. Repeat the
procedure, or consult Hilti Service.
If a connected product can still be used,
the remaining battery capacity is below
50 %.
If a connected product can no longer be
used, the battery has reached the end
of its useful life and has to be replaced.
Consult Hilti Service.
2354065
6.5 kg
21.6 V
150 m/min
127 mm
525 mm x 175 mm x
375 mm
1,140 mm x 12.4 mm x
0.5 mm
−17 ℃ ... 60 ℃
−20 ℃ ... 70 ℃
21.6 V
See the end of these op-
erating instructions
−17 ℃ ... 60 ℃
−20 ℃ ... 40 ℃
−10 ℃ ... 45 ℃
English
27

Advertenties

loading