Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
LOAD SELECT MODE
NOTE! Only for continuous radio mode.
1. Make sure that the stop button is pressed.
2. Press button 8. Keep pressed.
3. Twist and pull out the stop button.
4. Release button 8.
The top LED flashes (green).
5. WITHIN 1 MINUTE OF PULLING OUT THE STOP BUTTON:
Enter the code: 1–2–3–4 (press buttons 1, 2, 3, 4). LEDs 1–4 light up (red). If the code is invalid,
the transmitter switches off. When the code is accepted, the top LED flashes (green). LEDs 1–4
flash (red).
6. WITHIN 1 MINUTE OF ENTERING THE CODE:
Press button 6.
The top LED lights (green). LED 2 flashes (red).
7. Select a Load select mode by pressing a button according to the following table.
The top LED flashes (green) 3 times. The transmitter switches off.
Press...
button 7
button 1
button 2
button 3
button 4
for Load select mode...
0 (default)
1
2
3
4
- 19 -
with this load selected at start-
up
none
A
A
A
A
Advertenties
Hoofdstukken
Inhoudsopgave
