Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SHOW CHANNEL
1. Make sure that the stop button is pressed.
2. Press button 8. Keep pressed.
3. Twist and pull out the stop button.
4. Release button 8.
The top LED flashes (green).
5. WITHIN 1 MINUTE OF PULLING OUT THE STOP BUTTON:
Enter the code: 1–2–3–4 (press buttons 1, 2, 3, 4). LEDs 1–4 light up (red). If the code is invalid,
the transmitter switches off. When the code is accepted, the top LED flashes (green). LEDs 1–4
flash (red).
6. WITHIN 1 MINUTE OF ENTERING THE CODE:
Press button 4.
The top LED lights (green).
7. The selected channel will be indicated as follows:
LED 1 flashes (red) the number of times corresponding to the first digit. LED 2 flashes (red) the
number of times corresponding to the second digit.
For example channel 23: LED 1 will flash 2 times, LED 2 will flash 3 times.
- 14 -
Advertenties
Hoofdstukken
Inhoudsopgave
