Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
Quick logout
NOTE! Quick logout can only be performed when the transmitter is on and the radio link is up.
The Quick logout will log the transmitter out from all receivers that are part of the radio session.
1. Press button 7. Keep pressed.
2. Press the stop button.
The top LED lights (red).
The transmitter takes approximately 3 seconds to logout. The transmitter switches off.
Logout from menu mode
This logout option is mainly used when the button for quick logout is used by another function.
1. Make sure that the stop button is pressed.
2. Press button 8. Keep pressed.
3. Twist and pull out the stop button.
4. Release button 8.
The top LED flashes (green).
5. WITHIN 1 MINUTE OF PULLING OUT THE STOP BUTTON:
Enter the code: 1–2–3–4 (press buttons 1, 2, 3, 4). LEDs 1–4 light up (red). If the code is invalid,
the transmitter switches off. When the code is accepted, the top LED flashes (green). LEDs 1–4
flash (red).
6. WITHIN 1 MINUTE OF ENTERING THE CODE:
Press button 7.
The top LED flashes (red).
The transmitter takes approximately 10 seconds to logout.The transmitter switches off.
- 12 -
Advertenties
Hoofdstukken
Inhoudsopgave
