Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
SWITCH CHANNEL
1. Make sure that the stop button is pressed.
2. Press button 8. Keep pressed.
3. Twist and pull out the stop button.
4. Release button 8.
The top LED flashes (green).
5. WITHIN 1 MINUTE OF PULLING OUT THE STOP BUTTON:
Enter the code: 1–2–3–4 (press buttons 1, 2, 3, 4). LEDs 1–4 light up (red). If the code is invalid,
the transmitter switches off. When the code is accepted, the top LED flashes (green). LEDs 1–4
flash (red).
6. WITHIN 1 MINUTE OF ENTERING THE CODE:
Press button 8. Keep pressed.
7. Press button 4. Release.
8. Release button 8.
The top LED lights (green). LED 2 (red) flashes.
9. Select channel 11–26 according to the following table.
LED 3 lights (red) when a valid digit has been entered.
LEDs 3 and 4 light (red) when two valid digits have been entered.
The top LED flashes (green) 3 times. The transmitter switches off.
Press...
button 1
button 2
button 3
button 4
button 5
button 6
button 8 (shift) + button 1
button 8 (shift) + button 2
button 8 (shift) + button 3
button 8 (shift) + button 4
For example channel 20: Press button 2 for the first digit. For zero, press button 8, keep pressed, press button
4, release button 4, release button 8.
for digit...
1
2
3
4
5
6
7
8
9
0
- 15 -
Advertenties
Hoofdstukken
Inhoudsopgave
