Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
CHAPTER 5: CONFIGURATION SETTINGS
ENTER MENU MODE
1. Make sure that the stop button is pressed.
2. Press button 8. Keep pressed.
3. Twist and pull out the stop button.
4. Release button 8.
The top LED flashes (green).
5. WITHIN 1 MINUTE OF PULLING OUT THE STOP BUTTON:
Enter the code: 1–2–3–4 (press buttons 1, 2, 3, 4). LEDs 1–4 light up (red). If the code is invalid,
the transmitter switches off. When the code is accepted, the top LED flashes (green). LEDs 1–4
flash (red).
6. WITHIN 1 MINUTE OF ENTERING THE CODE:
Enter a menu by pressing the buttons according to the image below.
1
2
4
6
If no buttons are pressed within 1 minute, the transmitter will switch off.
1. Radio mode
2. Replace
3. Show channel
4. Automatic shutdown
3
5. Load select mode
5
6. Logout
7. Shift button
7
Shift + 3. Switch channel
Shift + 5. Load at start-up
- 13 -
Advertenties
Hoofdstukken
Inhoudsopgave
