Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
AUTOMATIC SHUTDOWN
NOTE! Only for continuous radio mode.
Automatic shutdown can save battery capacity by automatically switching the transmitter off following a
preset period of inactivity.
Setting the automatic shutdown time
1. Make sure that the stop button is pressed.
2. Press button 8. Keep pressed.
3. Twist and pull out the stop button.
4. Release button 8.
The top LED flashes (green).
5. WITHIN 1 MINUTE OF PULLING OUT THE STOP BUTTON:
Enter the code: 1–2–3–4 (press buttons 1, 2, 3, 4). LEDs 1–4 light up (red). If the code is invalid,
the transmitter switches off. When the code is accepted, the top LED flashes (green). LEDs 1–4
flash (red).
6. WITHIN 1 MINUTE OF ENTERING THE CODE:
Press button 5.
The top LED lights (green). LED 2 flashes (red).
7. Select the automatic shutdown time by pressing a button according to the following table.
The top LED flashes 3 times (green). The transmitter switches off.
Press...
button 1
button 2
button 3
button 7
Automatic shutdown time after...
3 minutes
6 minutes
12 minutes
No automatic shutdown
- 17 -
Advertenties
Hoofdstukken
Inhoudsopgave
