Advertenties
Beschikbare talen
Beschikbare talen
3. Once cleaning is finished, the cleaning robot returns
to the starting area.
The display shows the time needed for cleaning and
the size of the cleaned area.
A detailed cleaning report can be viewed in the app.
Routine mode
Starting the exploratory run on the device
1. In the "Cleaning" main menu, select the button "New
map" > "Autonomous mapping".
A prompt appears on the display asking whether the
device and the environment have been prepared for
cleaning.
2. Prepare the device and the surrounding area ac-
cordingly and keep the floor free of objects lying
around. Open the doors of the rooms that are to be
cleaned.
3. Confirm with "Confirm" button
The cleaning robot starts the exploratory run.
4. Once the exploratory run is complete, the cleaning
robot returns to the starting point.
The display shows the time needed for the explora-
tory run.
The map is now available in the app and can be
named and adapted. If there is no connection to the
app when the map is created, the map is still initially
saved on the cleaning robot with a date and time
stamp.
Performing a manual exploratory run via remote
Manual map creation via remote control is suitable for
areas where autonomous map creation could be chal-
lenging for the cleaning robot (e.g. glass buildings) or for
areas that do not need to be fully mapped, as no com-
plete cleaning of the area is required.
1. In the "Cleaning" main menu, select the button "New
map" > "Map creation via remote control".
A message that the remote control should be called
up in the app appears on the display.
2. Call up the remote control in the app and confirm the
message with "Confirm" button .
3. Use the remote control to guide the cleaning robot
through the areas to be mapped.
The map creation is shown on the display at the
same time.
English
control
23
Advertenties
