Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
installation
SACRIfICIAl ANoDe | ThReADeD ImmeRSIoN heATeR bgC
2.8 Sacrificial anode (spare part)
If a sacrificial anode is installed into the
SBB ... plus storage tank, the following must be observed:
G
G Installation – sacrificial anode
»
Pull out the red shut-off plug while simultaneously depressing the
pressure ring,.
»
Push in the open pipe end of the indicator element until dead-stop.
»
Attach the sticker "Sacrifical Anode weat indication" to a highly vis-
ible spot on the insulation.
When the storage tank is not operated with a signal display, the
!
red plug must remain in the anode!
H Function – Sacrificial indicator
(protective anode with consumption indication)
»
After degradation of the anode, humidity escapes through the
hollow anode core to the signal cartridge and causes a color change
there
»
When the cartridge turns red contact the installer to check the
anode and if needed replace it.
white
H
Anode o. k.
2.9 Threaded immersion heater BGC
The BGC is inserted at the tank front into a 1½" female connection. For
this, remove the cover lid from the external casing.
Observe the immersion heater installation instructions.
16
|Sbb plus
1.
2.
red
Service
www.stiebel-eltron-usa.com
Advertenties
Inhoudsopgave
