Advertenties
Beschikbare talen
Beschikbare talen
3.2
Intended use
The product described is a gasoline-powered cut-off saw for the wet or dry cutting of asphalt, mineral
construction materials or metals using diamond cut-off wheels or abrasive cut-off wheels. It can be held and
guided by hand or mounted on a saw trolley.
3.3
Recommendations for use
•
Use of the wet cutting method is preferable in order to reduce the amount of dust produced when cutting.
By using the self-priming water pump (accessory) you can work without need for a water supply hose.
The water can be drawn, for example, directly from a container.
•
Do not cut right through the workpiece in one pass. Move the saw back and forward several times until
it gradually reaches the desired cutting depth.
•
To avoid damaging the diamond cut-off wheel when dry cutting, lift the wheel out of the cut for approx.
10 seconds every 30 to 60 seconds while the saw is still running.
•
Resharpen a dulled diamond cut-off wheel (i.e. when no diamonds project from the segment matrix) by
cutting with the wheel in a very abrasive material such as sandstone.
•
For extensive floor sawing applications, mount the saw on the trolley (accessory).
3.4
Specifications of the cut-off wheels
Diamond cut-off wheels in accordance with EN 13236 are to be used with the product. Synthetic resin-
bonded, fiber-reinforced cut-off wheels in accordance with EN 12413 (straight, not dish-shaped, type 41)
may also be used with the product for working on metals.
The mounting instructions and instructions for use issued by the cut-off wheel manufacturer must be
observed.
3.5
Items supplied
Gasoline-powered saw, operating instructions.
Other system products approved for use with this product can be found at your local Hilti Store or at:
www.hilti.group
3.6
Consumables and wearing parts
•
Air filter
•
Cord
•
Starter
•
Fuel filter
•
Spark plug
•
Tool set
•
Cylinder set
•
Mounting screw assy.
•
Flange (2)
•
Centering bushing 20 mm/1"
4
Technical data
Weight without cut-off wheel, fuel tank
empty
Weight with saw trolley, without cut-off
wheel, fuel tank empty
Maximum spindle speed
Max. rotational speed of the cut-off
wheel
Maximum cutting depth
28
English
DSH 700-X
35/14''
11.9 kg
40/16''
•/•
35/14''
42.9 kg
40/16''
•/•
35/14''
5,100 /min
40/16''
•/•
35/14''
5,100 /min
40/16''
•/•
35/14''
125 mm
40/16''
•/•
2271384
DSH 900-X
12.0 kg
12.4 kg
43.0 kg
43.4 kg
5,100 /min
4,700 /min
5,100 /min
4,700 /min
125 mm
150 mm
*2271384*
Advertenties
