Inhoudsopgave
Advertenties
Beschikbare talen
Beschikbare talen
deviation can seriously damage the running belt. It must be found and corrected in time. Running belt
deviation does not belong to the scope of warranty, mainly by the user in accordance with the manual self-
maintenance. Deviation will seriously damage the running belt, must be found in time, timely correction.
6. Adjustment of the motor's belt
The motor belt of treadmill is adjusted in the factory. However, after a period of use, there may be slack or
slip phenomenon. The step of adjustment: 1.Turn the adjusting screw counterclockwise with wrench.
3.The adjustment range shall be subject to the belt load not slipping.
4.Noted: Regular cleaning of belts and pulley grooves.
7. Troubleshooting
Item
Treadmill
didn't work
The running belt does not
run smoothly.
Running belt slips
The keys malfunction
Stop abruptly under normal
state
8. Common faults
Reason
A. No power
B. Safety key isn't in the right
position
C. Broken circuit signal system .
D. Switch off
E. Fuse burnt out.
A. No enough lubrication.
B. Running belt too tight.
A. Running belt too loose
B. Motor belt too loose
Broken keys
A..Safety key drop out
B. Broken system
Plug into socket
Replace the safety key
Check the controller input and signal wire
Switch ON.
Change the fuse
Use the Silicone oil
Adjust the tightness of running belt
Adjust the tightness of running belt
Adjust the tightness of motor belt
2. Change the key board and wire; 2.Change the
mainboard;
3.Change the console
Replace the safety key
Ask for professional checking & repair
28
Maintenance
Advertenties
Inhoudsopgave
